I made this Dead Cat Wind Muff/Screen with materials for $1 from Dollar Tree Store -
it also fits the other recorder in the pic.
Took me less than 10mins to make it -
I actually pirated
or more accurately amputated the leg of a teddy bear -
this was in the toys section in a Dollar Tree -
they did come in other sizes and shades of brown -
I just picked the biggest for the most material, and darkest brown.
The pic above shows where I cut off one of the legs.
Then turned it inside out and sewed up the open end:
Once sewn up - cut a slot in the "foot"
turned it back to the long "fur" side out -
the recorder(s) then slide into the opening
The Tascam DR-05 is a nice snug fit -
obviously the much smaller DR-03 and Teac VR-10 are loose -
I used an elastic hair tie to make the fit more secure for the smaller recorders.
This one is too small for the Tascam DR-07MkII with the microphones spread out or even in the collapsed X-Y position.
But I have plenty of material left to make a bigger/wider dead cat.
But the point is this one was really easy since the leg was already a tube, so I only had to sew up one end....
and I can see the arms can be cut off to probably fit some microphones as-is without any further work
(I might do just that for the Tascam DR-07MkII for each of the mics in the spread out A-B position)