Gear / Technical Help > Battery Boxes, Preamps, Mixers, ADCs, and Processors
MiniMe Thoughts
danmorgan:
--- Quote from: jpschust on June 11, 2003, 01:30:36 AM ---im talking purely on manufacturing- the unit should have a female connector on the back so that one could do locking 4 pin to locking 4 pin
--- End quote ---
I thought so, same with the Inputs.... I thought you had word on some sort of mod here. :-\
Tim:
--- Quote from: jpschust on June 11, 2003, 12:19:17 AM ---to go back to this wallwart thing- wall warts for portable gear like this are a BAD solution. There needs to be a locking power cable of some sort. Why have a cable that can very easily come loose with a slight jostle? Why not just spend the extra buck and make it a locking xlr connector? There are any number of locking solutions for this!
--- End quote ---
Some of you must have gotten screwed by your retailer. The cable that I use sits in *very* snuggly and I can pick up the unit and move it all around and plug/unplug from the spdif and aes without any problems. I guess locking would be nice but it's not necesary with the power cable that I got.
jpschust:
dan, if i can get ahold of a unit for a bit i might be able to see what i could do on moding it. if nothing else i could probably hard wire the connection internally > 4 pin so that you would essentially have a pigtail with a 4pin xlr on it.
danmorgan:
--- Quote from: jpschust on June 11, 2003, 02:26:51 AM ---if nothing else i could probably hard wire the connection internally > 4 pin so that you would essentially have a pigtail with a 4pin xlr on it.
--- End quote ---
Not much room internally. Pigtail idea is a good one...it could be clamped well and be a good option. I think I'll be checking it out soon, tommorrow if I have time.
Navigation
[0] Message Index
[*] Previous page
Go to full version