- 7-pin active -> v3. i'll have an oade active 7-pin which i'll connect one end to a d100, but am i correct in saying that i'll need an additional digi cable to connect the oad 7-pin to the v3?
- mic bodies -> v3. using the kc5g cables, and having the mic bodies in the bag, i'll only be needing short xlr(f) -> xlr(f) cables. leegeddy and kindcables all have numerous mentions and i'd be happy to pick up a pair from either of these guys, but canare's seem to get rave reviews also. right angle seems to be the way to go.
- battery power -> v3. i've yet to sort out the v3 power situation, being in australia i'll have to either pick up a pack from the u.s. and use a step-down converter for charging here with 240v or go via some other route. but back to the cabling -- a right-angle power cable to the battery pack seems the way to go, leegeddy or kindcables could again provide this?
v3 is really easy to work with in terms of cables. no quirks about spacing, special connectors, etc.
1. you'll need a short s/pdif cable to connect the v3 > oade 7pin.
2. short IC with right angle xlr. Canare/Belden are fine cables, but silver clad cables are better
3. the ESA brand of 9v lithium battery comes with a universal charger that accepts 240v, so you don't need a converter. cable wise, you'll need a simple 9v lithium > v3 power plug. i specially make RA V3 power cables too.
congrats on the v3 acquisition. it's a damn fine piece of gear.
marc