I have some comments and questions, having just bought a Micro Track 24/96.
I wonder if anyone encountered this issue - I have drives mapped to "a", "c", "d", "e", "f", and a network external hard drive mapped to "g". When I plugged my micro track into the computer to install the upgrade, it was apparent thaqt the system recognized the microtrack, but I could not see it or find it. I could eject it, and I could look at properties, but it would not show up under "my computer". I cannot remember exactly where I was finding the properties (somewhere in the control panel), but I found it was showing that the Micro Track was also mapped to drive "g". It was almost as if the Micro Track was stuck behind the other external drive. I then re-mapped the hard drive (to "m"), and intantly the Micro Track showed up and I was able to do the firmware upgrade. I have no idea if anyone has experienced anything like this or if it has anything to do with the latest firmware upgrade, but I throw it out there in case any one else has any problems.
I have one big burning question that does not exactly get answered in the manual. (or it does and I do not like the answer). It involves the L/M/H button and exactly what it does. What I want to know is if I use a 1/8 input, for my mics, can I put the switch in the "L" (line) position. Willl it then act as a "line in" and not a "mic in". From my NJB3 days (going all the way back a week or so), I always plugged my mics 1/8 cable into a battery box, and that into a "line in" connection and that yielded superior sound than the "mic in" connection. The manual seems to imply that the "L" (Line in) position is only for the 1/4 mic inputs. Does anyone have any experience with this? Thanks!!