Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: darktrain on March 17, 2010, 10:09:59 PM
-
Anyone know what wires go where on the tekkeon to v3 cable, i got the kppx-3p(tekkeon plug) which is 3 solder cups the the v3 locking connector which is 2 solder points, anyone direct me how to wire this?
-
Attached is a drawing we use for the V3-Tekkeon cable. Use an ohm meter to determine what wires go to what pins. Pin 1 is + and pins 2 and 3 are connected to ground.
Neal