Taperssection.com

Gear / Technical Help => Cables => Topic started by: Chomps on June 03, 2009, 11:04:41 AM

Title: ISO: someone to build a power cable for SD-MP2
Post by: Chomps on June 03, 2009, 11:04:41 AM: Looking for a locking power cable for my SD Mp-2.
Will be used into a DVD battery.

Center Pin = Positive
Sleeve = Negative

Take right from the SD site.

If you can help me out drop me a PM.

Keith
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: Chomps on June 03, 2009, 05:21:44 PM: Well after trying to find something cheap at radio shack to hold me over and coming up empty I really need this sooner than later.

Who can build this?

Keith
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: Krispy D on June 03, 2009, 05:54:58 PM: Keith if you buy the connectors I will build your cable. Free. But doubtful if it can be done by Saturday.
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: Chomps on June 03, 2009, 06:06:21 PM: Quote from: Krispy D on June 03, 2009, 05:54:58 PM
Keith if you buy the connectors I will build your cable. Free. But doubtful if it can be done by Saturday.

Where do I buy them?
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: Krispy D on June 03, 2009, 06:12:30 PM: do I really have to hunt em down for you... ;)
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: Chomps on June 03, 2009, 06:25:52 PM: Quote from: Krispy D on June 03, 2009, 06:12:30 PM
do I really have to hunt em down for you... ;)

Duh...you should know me by now...Hand holding please.
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: fmaderjr on June 03, 2009, 07:09:13 PM: Is this it?
http://www.ccddirect.com/store/customer/product.php?productid=17316&cat=266&page=1
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: Krispy D on June 03, 2009, 07:26:05 PM: I don't believe so, I think the brick takes a threaded Coaxial
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: dgny on June 06, 2009, 08:12:27 AM: Here is a link to switch craft, this is the end-connector for the Mp2.
I don't know what your other connector is but poke around the switch craft site.
Hope this helps. http://www.switchcraft.com/products/jack-146.html

:Switchcraft part # S760K
Title: Re: ISO: someone to build a power cable for SD-MP2
Post by: jeromejello on June 14, 2009, 02:33:33 AM: ed at kind kables built a power cable for my sd mp2. it is awesome, but i dont know if it will be available as quick as you are hoping.