Topic: Wavelab gain application problem..

[johnw]

not exactly the same but I ran into a strange issue woth this last week.  I would highlight the channel I needed to check/raise the gain.  would hit the get peak level.  then when I set the gain and told it to raise it it would raise the channel that wasn't highlighted.  did it over and over.  so I then tried to highlight the wrong channel thinking it may raise the one I needed.  it then raised the one that was highlighted ie the worng channel.  no fucking idea why   

I ran into that too John..that exact problem...weird.

Me 3. I ended up using SF5 after trying to get it to raise the channel (I know I selected) for 20 minutes.

[F.O.Bean]

right click and select the either left or right channel only

[Ray76]

right click and select the either left or right channel only

tried that.

[momule]

how about a small flac sample Ray?
Im guessing it has to be user error as Im running 5.00a and I have no prob's like this...
Im intrigued now..

[Ray76]

how about a small flac sample Ray?
Im guessing it has to be user error as Im running 5.00a and I have no prob's like this...
Im intrigued now..

Hey Nick.

I actually fixed it, so I dont have a sample but i had to go in...do an autosplit..."split stereo track into two mono tracks", open them up individually, and apply gain that way. it was weird...

[momule]

Just a quick ?.  do you not save your master file ? Or do you apply effects to your master

just for future reference you may try raising the gain in another "effect".
such as use the Leveler effect and you can select each channel or both..

glad ya got it fixed.
Nick

[Ray76]

Just a quick ?.  do you not save your master file ? Or do you apply effects to your master

just for future reference you may try raising the gain in another "effect".
such as use the Leveler effect and you can select each channel or both..

glad ya got it fixed.
Nick

I saved the master concert file..but this was seperate from that...this was soundcheck. thanks for your advice man. +T I appreciate you.

[Gordon]

right click and select the either left or right channel only

that's how I did it  .  I'm not that dumb 

[kskreider]

Ok...I have a wav file that is unbalanced...one channel is 4db off from the other. I decided to bring them both up to zero..they were way
this other channel..no matter how much I select it and add gain(or try to add gain) I still get the same readout of the analyzation every time. I dont know the exact number but i get -6.34 db is the average peak of the selection...so I added 4db...i get the same message...basically the gain cant be added to that channel...no matter how I try to do it...

This happened to me last night too for the first time with WL 5.0.  It has never happened before and I do know what I'm doing with WaveLab.  I ended up adding gain with SoundForge 7.0.

Weird huh?

If you haven't already I would make sure to do two things.  1)upgrade to 5.01b and 2)use your software firewall to block it's internet access.

[Gordon]

it seems to be a bug in 5.0  got the upgrade and all is well.

[F.O.Bean]

it seems to be a bug in 5.0  got the upgrade and all is well.

how much is the upgrade

[F.O.Bean]

the post above says that we should upgrade to 5.01b, that link you have is for 5.01a

[F.O.Bean]

also, where do i install the patch

[F.O.Bean]

+T tim, thanks my man!

[Gordon]

bean
PM sent