I installed the bootloader onto the HD before removing it and adding the CF Adapter. Was that correct or was i supposed to put the bootloader on to the CF card also?
I copied over the most current build on to the CF card.
The reason I ask is because i have reset the thing numerous times into rockbox and into the original iriver firmware. When I boot into the iriver firmware it says "Check HDD Connection", that disappears and then says "check HDD"
When i boot to rockbox is says "ATA error -80 insert usb cable and push a button", and a couple seconds later "no partition found".
When I start Rockbox with the hold button engaged this is what comes up:
Rockbox Boot Loader
Version 7pre4
Batt: 4.17
Hold Switch On
Shutting Down...
And then proceeds to shut down.
I'm now officially lost.