OK, new question (sort of):
Being relatively new to using a pre-amp & phantom power for microphones, I need some clarification from those in the taping community.
My main concern will be when using mics > pre > 744T. Mics being used on stage to essentially mic amps and drums.
In comparing the Sound Devices 302 to the Sound Devices MixPre-D, I see, aside from the obvious additional mic input on the 302, is that the 302 has a gain control for each input as opposed to the MixPre-D having no additional gain control at all (in other words, the gain will be set at a permanent 0db). Also, the MixPre-D has a digital output, whereas the 302 only has an analog output. Did I miss any other important differences?
My questions regarding my observations are these:
How important is the mic gain, in addition to the fader (input) and the input on the 744T? Please explain so I understand, this is new for me.
It seem to me that a digital output would be important running into the 744T, as opposed to analog...is it? What are the differences?
Thank you in advance...I've managed to avoid using mic pre's (other than a small stealth one) for over 30 years, but it's finally caught up with me, and now I need help.