Topic: Windscreens for CK91 caps

[lsd2525]

Anyone have any suggestions? Thanks!!

[obaaron]

OEM:  http://www.bhphotovideo.com/c/product/162947-REG/AKG_6000_H_06240_W_32_Windscreen.html

Aftermarket: http://www.bhphotovideo.com/c/product/282432-REG/DPA_Microphones_UA0896_UA0896_Windscreen_for_0_75.html

[vanark]

I have a pair from when I ran the CK91/CK93 + SE300B bodies.  PM me an offer...

[lsd2525]

Thanks. I looked at the W90's, first time I saw the 32's. Vanark, what kind are they? I picked up a pair of WindTech series 1200 I think it was at Sam Ash last night as I'm doing Mule tonight but the way I lose those things it would hurt to have a spare pair. Thanks!!

[hoppedup]

I bought the Windtech 1200s for the AKG SE300B-CK91 I recently acquired and it looks like I will need an elastic band to keep them on. They are very loose fitting.

[willndmb]

OEM:  http://www.bhphotovideo.com/c/product/162947-REG/AKG_6000_H_06240_W_32_Windscreen.html

Aftermarket: http://www.bhphotovideo.com/c/product/282432-REG/DPA_Microphones_UA0896_UA0896_Windscreen_for_0_75.html

this is actually the one designed for ck9_ caps http://www.bhphotovideo.com/c/product/162950-REG/AKG_2496_Z_00010_W90_Windscreen.html
They fit ck6_ too but are a little snug going on

[vanark]

Thanks. I looked at the W90's, first time I saw the 32's. Vanark, what kind are they? I picked up a pair of WindTech series 1200 I think it was at Sam Ash last night as I'm doing Mule tonight but the way I lose those things it would hurt to have a spare pair. Thanks!!

Windtech 1300's - a little smaller than the 1200's but they work better in the CK91/92/93 series.  Snug enough not to come off without wanting them to.

[lsd2525]

Actually the 1000's is what I think they need but Sam Ash didn't have any. I slid my caps into the 1200's and they fit like a glove......I'll be tucking them into a homemade PVC bar so not much of a chance of them coming off. Amazed they are loose on yours Hoppedup.

[lsd2525]

I stand corrected. The 1200's are too big......

[hoppedup]

I stand corrected. The 1200's are too big......

I taped a show Saturday night and they stayed on the CK91 caps, but I will probably use a small rubber band in the future to make sure.

[lsd2525]

I stand corrected. The 1200's are too big......

I taped a show Saturday night and they stayed on the CK91 caps, but I will probably use a small rubber band in the future to make sure.

Yeah I just run the caps and they fit in there fine, but when I put them in the PVC mount it bacame obvious that they were too big. What sucks is if they would have been a bit bigger they would have slid over the PVC which would have been great because the caps are a little loose in the PVC anyway.

You tape the Paul and Fred show?

[hoppedup]

You tape the Paul and Fred show?

Yup. Should be live on the archive by tomorrow a.m. I am kicking myself for not taking gear to the Lee Boys last night. They were smokin'!!! They are playing at HRO tonight as well, but I am exhausted.

[lsd2525]

You tape the Paul and Fred show?

Yup. Should be live on the archive by tomorrow a.m. I am kicking myself for not taking gear to the Lee Boys last night. They were smokin'!!! They are playing at HRO tonight as well, but I am exhausted.

Know what you mean. Went to Mule straight from work Thursday, went to Phish straight from work Friday, got up Sat and went to my home town and worked at my mom's all weekend. Was glad to get back to work so I can get some rest:). I've got a backlog of shows to go through. Oh, I'm sending my DR60 back for replacement. Stopped recording on its on at Mule. Dammit. Contacted B&H Friday, they said send it back. Of course, it worked flawlessly at Phish Friday night........

[EarlyMorningRain]

Hmm, I bought some Windtech screens recently for my ck91 caps, used the matrix box thing on the windtech site to determine which ones to get (don't remember if they were the 1200 or 1300's). But man those things fit tight, like really tight! At first it was like, "these are not going to fit,", but after trying a few times they stretched out just enough to fit. Have yet to actually use them though.
I'll check at home tonight to see which model they were.

[vanark]

I think the matrix on the Windtech site is incorrect and will direct you to the incorrect windscreen.  The 1300 is a little snug on the CK91/2/3 series, but after a couple uses, it works perfectly.  The 1200 is definitely too big and will not stay on.