Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: macdaddy on July 24, 2007, 05:21:09 PM
-
using a 722 for the first time, so please forgive my ignorance...
should the sample rate and bit depth read 48k and 24b, respectively, assuming i want to run 24/48..? there are settings in the sample rate i have never seen, and i want to make sure i shouldnt be using one of those 48kF settings...
many thanks.
-
I believe 48F is actually 48048K, designed to record sound while shooting film that will be edited on video, and the final product will be on video. When importing a 48048k file into a DAW at 48000k sample rate, it will play back .1% slower, the same pull down when transfering film to video speed.
I recomend 44.1K for music, 48K audio for film and video.
-
it is set for 24bit 48k :)
no changes needed
-
it is set for 24bit 48k :)
no changes needed
yeah, but we switched it to 24/96
but now, since the second CF card didnt come, i just wanna go back to 24/48 so we dump the recording on the CF card after the gig... so i had to switch it back... right now it reads 24b 48k
i am thinking tis is correct, but i just want to make sure...
-
it is set for 24bit 48k :)
no changes needed
yeah, but we switched it to 24/96
but now, since the second CF card didnt come, i just wanna go back to 24/48 so we dump the recording on the CF card after the gig... so i had to switch it back... right now it reads 24b 48k
i am thinking tis is correct, but i just want to make sure...
cool.
i'll be there in time to give it a once over(if needed) befor the show.