Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: SBM1->Sony portable users....?  (Read 6587 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
SBM1->Sony portable users....?
« on: June 15, 2003, 06:44:22 PM »
Quick question...when running SBM1->D7/D8/M1, how do you folks position the 2 units? I know it seems like a silly question, but what's the best way to do it without putting to much pressure on the 7-pin cable?

Do you run them next to each other in your bag, set them out with one on top of the other, side by side? Any pics would be extra appreciated...

+T for anyone who can help (now that I know what the tix are for...)

Nick
Logged
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Tim

  • Guest
  • Trade Count: (0)
Re:SBM1->Sony portable users....?
« Reply #1 on: June 15, 2003, 06:51:40 PM »
on top of each other works well... get some velcro.
Logged

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re:SBM1->Sony portable users....?
« Reply #2 on: June 15, 2003, 07:31:18 PM »
I agree with Tim...on top of each other....and I take two velcro straps and strap it on top and bottom together...
Logged

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:SBM1->Sony portable users....?
« Reply #3 on: June 16, 2003, 11:54:11 AM »
Ditto.
Logged
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline dank

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1060
  • cold irons bound
Re:SBM1->Sony portable users....?
« Reply #4 on: June 16, 2003, 12:07:49 PM »
I run them side-by-side in a Samsonite camera bag on my belt for stealth... M1 on the left, SBM-1 on the right, with the 7pin going under both units.
Logged
Mics: DPA 4021, AT 933, AKG CK31, CK32
Pre:  Sonosax SX-M2
Recorders: Oade ACM PMD660, Tascam DR-60D, Tascam DR-2D, Sony PCM-M10[x2]
DIME List: http://www.dimeadozen.org/account-details.php?id=919941

Offline BillF

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
  • Gender: Male
  • AKG C480B-CK61/MP2/D100
Re:SBM1->Sony portable users....?
« Reply #5 on: July 03, 2003, 02:11:25 AM »
I seen this experienced taper use a camera bag and advised for me to do the same.  Does not fit all his gear, but a little planning can eliminate all the clutter.  I use some Vinyl Electricians bundling tape. I found it in Home Depot and it is 2" wide.   It does not leave any sticky residue on the equipment and, of course, electrical tape for all my connections.  If any residue is left, Alcohol will take it off the outside of most surfaces, just be careful on the inside as any residue can affect sound....
 
Anyway the taper had his velcro taped together in the stacked config with a lead acid battery on the bottom. ( Battery not velcro'ed)  Looked like a good set-up form what I was saw.
Bill
Logged
"Technology will set you free..."  but has made my life a living hell.
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.045 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF