Become a Site Supporter and Never see Ads again!

Author Topic: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp  (Read 8364 times)

0 Members and 1 Guest are viewing this topic.

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« on: September 01, 2008, 11:39:54 AM »
I stumbled on this while cruising the web:
http://www.emu.com/products/product.asp?category=610&subcategory=611&product=17511
------------------
E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp is the ultimate portable USB audio interface for Mac and PC, offering pristine 24-bit/192kHz recording and playback, direct monitoring, and a host of professional features in a compact, USB bus-powered package. The Tracker Pre USB provides users with two Class-A ultra-low noise Mic/Line/Hi-Z preamplifiers that can be run independently or in stereo to record guitars, keyboards or microphones with optimal audio performance. CurrentMorph™, a patent-pending circuit design, allows Tracker Pre to offer +48V phantom power and use premium high-power converters while using only USB bus power.

A couple of interesting features:

5 VDC Power Adapter (optional)
Although the Tracker Pre is normally bus-powered via USB, it can also be powered by an optional 5-Volt DC power adapter to allow it to be used as a stand-alone stereo microphone preamplifier. (power consumption ???)

Stereo Mic Input
This 1/8" mini-phone jack is designed to accept a stereo, electret condenser microphone. The jack supplies +5VDC phantom power. Mono microphones can also be connected and will use input 1L. Note: The Stereo Mic jack takes precedence over the Hi-Z/Mic/Line inputs. Inserting a 1/8" plug disables the other inputs.

Inserts (1L & 2R)
These unbalanced TRS jacks allow you to insert a signal processor, such as a compressor or EQ, after the mic preamps, but before the A/D converter stage. The Insert jacks can also be used to tap off the mic preamp outputs when using the Tracker Pre as a stand-alone stereo microphone preamp.
---------------
$149 @ Musician's Friend
---------------
It looks like it can be used as a portable battery powered preamp with Phantom Power for condenser mics or for some of the smaller stereo mic rigs. I haven't found dimensions or weight specs yet but it looks somewhat small and light (Plastic). It certainly will not replace the small battery powered pre's like the CA-9100 for low profile applications, esp. not the CA-UGLY. This might be a good entry level product for noobies because it will work with a variety of mics and recording setups and allows for a variety of paths for upgrading or expanding starter rigs.

So, anybody have any feedback as to sound quality? That's the big question! I know ... you get what you pay for but sometimes there are deals. I'm not in the market for it myself, well ... probably not.
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline trustthex

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 583
  • Gender: Male
  • Trainwreckin' Fool
Current Foolishness-
AT853c > 3-wire BB > LS10
AT853c > Tinybox > R-09

Other gear in my bag-
SP-CMC-1 (AT 829), ECM-717, Sharp MD-MS702
2x Teac ME-50 (C), AT ATR6250, SP-SPSB-2

Team TEXAS, Naiant, Jazz, Vinyl, moe.

-------
If you have any Brave Combo that needs transferred/uploaded, etc... PM me.

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #2 on: September 01, 2008, 08:21:18 PM »
He seems to think its a pretty good bang for the buck. Now what is needed is some field testing by people with our particular uses.

His conclusions:
---------
E-MU’s gambit seems to have worked: their CurrentMorph circuit design looks like a winner. Though the device can only handle two input signals simultaneously, it’s able to deal with many different connections thanks to it’s combo inputs and preamps. The drivers are stable and latency is quite low. And though I think it could have used a midi in/out, it seems to be a pretty complete low-cost solution. In addition, the device is designed to serve different purposes (like serving as a autonomous preamp with external power or an audio interface). Even if there are better preamps and converters out there (of that there’s no doubt), the ones on this unit are better than you would expect for this price range. In the end, despite a few quirks, the Tracker Pre USB 2.0, with a MSRP of around $199.99, is a very good value for the money.

Pluses:
Value for the Money
Software Bundle
Preamps - value for the money
Completely USB Powered - including Phantom Power!
Drivers - Low Latency
Direct Monitoring
Inserts
Ground-Lift Switches
Versatility - Can also be used as an autonomous Preamp

Minuses:
Phantom Power Pop - when turned on and off
The GUI (or lack of it)
Level Indicators - could have used at least one more
Continuous Direct Monitoring Knob
------------

Like I said, this might make a great starter pre. Not perfect but passable and adaptable. A whole lot of the people wanting to record have laptops so add this, some budget mics, cables and a stand and you are in business. Add an H120 or JB3 or an all in one like an R-09HR and a DVD battery and you've got an easily portable a rig.

I'm saving for an R-44 myself so I don't need this, it just looked interesting. Plus I'm watching the progress on the Five Fish Studios pre that is practically being designed in this forum though I may be entering gear slut territory if I buy one: http://taperssection.com/index.php/topic,108569.0.html (but its so damn pretty!)
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline beeco

  • Trade Count: (19)
  • Taperssection Member
  • ***
  • Posts: 277
  • Gender: Male
  • Copyright 2008, a production of Camp Totally Lit
Now you see it:  ADK 51TL,  or MK4/41>KC5>CMC6, or AT4051b/4049a > Wendt X2 > R-09HR
Now you don't:   CA-14c  or DPA4061 > CA ST-9100 > R-09HR


"Wait a minute, this sounds like rock and or roll!" Reverend Lovejoy

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #4 on: September 01, 2008, 09:18:31 PM »
Actually it was from looking up the 404 in your thread that I stumbled across this pre. I kind of got distracted after that. I noticed that the ebay item said it was an "EMU 0404 USB Soundcard". They do make a soundcard version from what I saw but that's not what they are picturing. I'd find out for sure which item they meant before bidding.
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline trustthex

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 583
  • Gender: Male
  • Trainwreckin' Fool
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #5 on: September 01, 2008, 09:21:07 PM »
ebay is firewalled here at work, but iirc, the tracker pre is an upgrade to the 202, and the 404 appears to be an upgrade from that... probably wouldn't allow you to use the pre/phantom untethered from usb however.
Current Foolishness-
AT853c > 3-wire BB > LS10
AT853c > Tinybox > R-09

Other gear in my bag-
SP-CMC-1 (AT 829), ECM-717, Sharp MD-MS702
2x Teac ME-50 (C), AT ATR6250, SP-SPSB-2

Team TEXAS, Naiant, Jazz, Vinyl, moe.

-------
If you have any Brave Combo that needs transferred/uploaded, etc... PM me.

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #6 on: September 01, 2008, 09:42:04 PM »
Actually the 404 isn't USB powered, it has a 5vDC input for power. It has no inserts and the write up at the E-MU web site makes no mention of being able to be used without the USB hooked up: http://www.emu.com/products/product.asp?product=15185&nav=features. The main outputs may be after A/D conversion and may actually require computer processing like the UA-5 without the digimod or an M-Audio Mobile Pre.
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline beeco

  • Trade Count: (19)
  • Taperssection Member
  • ***
  • Posts: 277
  • Gender: Male
  • Copyright 2008, a production of Camp Totally Lit
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #7 on: September 01, 2008, 11:22:06 PM »
just sent an email via the E-MU website to ask whether the 0404 works in standalone mode or whether it has to be connected via USB to a computer to pass an analog or digital signal.  I'll report their response.
Now you see it:  ADK 51TL,  or MK4/41>KC5>CMC6, or AT4051b/4049a > Wendt X2 > R-09HR
Now you don't:   CA-14c  or DPA4061 > CA ST-9100 > R-09HR


"Wait a minute, this sounds like rock and or roll!" Reverend Lovejoy

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #8 on: September 01, 2008, 11:38:56 PM »
just sent an email via the E-MU website to ask whether the 0404 works in standalone mode or whether it has to be connected via USB to a computer to pass an analog or digital signal.  I'll report their response.

+T
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline trustthex

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 583
  • Gender: Male
  • Trainwreckin' Fool
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #9 on: September 02, 2008, 02:24:20 AM »
everyone has probably noticed this by now, but the 0202 has only one xlr, hence the tracker pre being an upgrade.  the 0404 has all of the controls on the top, which makes it alot less worthwhile for what we do...
Current Foolishness-
AT853c > 3-wire BB > LS10
AT853c > Tinybox > R-09

Other gear in my bag-
SP-CMC-1 (AT 829), ECM-717, Sharp MD-MS702
2x Teac ME-50 (C), AT ATR6250, SP-SPSB-2

Team TEXAS, Naiant, Jazz, Vinyl, moe.

-------
If you have any Brave Combo that needs transferred/uploaded, etc... PM me.

Offline flintstone

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 767
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #10 on: September 02, 2008, 11:06:58 AM »
Looks like the Tracker Pre can provide 48V DC "phantom" power on the XLR, or
5V DC "plug in" power on the 1/8-inch stereo jack.  Nice!

Offline Kevin T

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #11 on: September 03, 2008, 11:07:00 AM »
Yep

Finally a pre/ powersource  for my 5v 3.5mm stealth's AND l my Larger 48v XLR mics. And a good USB interface direct monitor too!

Offline flintstone

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 767
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #12 on: September 04, 2008, 12:36:34 AM »
Here's the word on the Tracker's power needs, from EMU tech support.

Tracker external power supply
INPUT: AC100V  50-60Hz  28VA
OUTPUT: DC5V 2.4A


The 2.4A draw at 5V DC is higher than I expected.

Flintstone

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #13 on: September 04, 2008, 05:33:26 AM »
Here's the word on the Tracker's power needs, from EMU tech support.

Tracker external power supply
INPUT: AC100V  50-60Hz  28VA
OUTPUT: DC5V 2.4A


The 2.4A draw at 5V DC is higher than I expected.

Flintstone

I'm not disputing the numbers but they sure aren't pulling 2.4A when they are using the USB bus for power, I wonder why the external power draw would be so high? Especially since they tout the circuitry for producing Phantom Power. Actually I bet the walwart is CAPABLE of producing 2.4A, not that the unit NEEDS that much power. I could be wrong though, I often am. I'm getting used to it though.
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

Offline beeco

  • Trade Count: (19)
  • Taperssection Member
  • ***
  • Posts: 277
  • Gender: Male
  • Copyright 2008, a production of Camp Totally Lit
Re: E-MU's Tracker Pre USB 2.0 Audio Interface/Mobile Preamp
« Reply #14 on: September 04, 2008, 12:00:23 PM »
Here is E-MU tech support's answer to my question as to whether the 0404 USB 2.0 interface can be used in standalone mode...

Bevin,

Unfortunately, the 0404USB cannot be used without the connected to a PC.

However our new product, the Tracker Pre, has the ability to work standalone as a preamp.

Best regards,
Phil
EMU Systems


We already knew the Tracker Pre could do that, I think.
Now you see it:  ADK 51TL,  or MK4/41>KC5>CMC6, or AT4051b/4049a > Wendt X2 > R-09HR
Now you don't:   CA-14c  or DPA4061 > CA ST-9100 > R-09HR


"Wait a minute, this sounds like rock and or roll!" Reverend Lovejoy

 

RSS | Mobile
Page created in 0.071 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF