Taperssection.com
Gear / Technical Help => Cables => Topic started by: cgrooves on July 02, 2007, 05:23:51 PM
-
Has anyone found a U.S. supplier for a Right-angle Toslink to Right-angle Mini Optical Cable?
Shaggy references one in this thread:
http://taperssection.com/index.php/topic,86786.0.html (http://taperssection.com/index.php/topic,86786.0.html)
but I have been unable to locate that particular cable (or one like it) anywhere.
-
mcminone used to carry them in 1,2 and 5 meter lengths. They no longer list them on their website but if enough people ask them about them they may have another run made. LAst time they still listed them but were oiut of stock they showed a minimum run of 100 needed for them to get them back in stock.
-
I submitted the question to them. They still have the RA mini - RA mini, BTW.
It's hard to believe that these cables are not available anywhere except Japan (or at least apparently so).
-
What about this RA adapter?
http://www.minidisc.org/part_Dayton_Audio_Right-angle_TOSLink_connector.html (http://www.minidisc.org/part_Dayton_Audio_Right-angle_TOSLink_connector.html)
-
those suck.
the cable i have is one solid cable, with a right angle swivelling toslink on the 'big end' and a right angle minplug on the other. it came with my optimod v3, i need to ask the person i bought it from. i use it instead of coax, cause its more reliable. I'll find the source of this...
What about this RA adapter?
http://www.minidisc.org/part_Dayton_Audio_Right-angle_TOSLink_connector.html (http://www.minidisc.org/part_Dayton_Audio_Right-angle_TOSLink_connector.html)
-
the cable i have is one solid cable, with a right angle swivelling toslink on the 'big end' and a right angle minplug on the other. it came with my optimod v3, i need to ask the person i bought it from. i use it instead of coax, cause its more reliable. I'll find the source of this...
Please do, and thanks in advance. I know I could use one of these as a back-up.
-
those suck.
the cable i have is one solid cable, with a right angle swivelling toslink on the 'big end' and a right angle minplug on the other. it came with my optimod v3, i need to ask the person i bought it from. i use it instead of coax, cause its more reliable. I'll find the source of this...
I use the same one. I bought mine from SP for ~$20, and then found another retailer soon after for a bit less. Maybe someone can chime in....
-
I use the same one. I bought mine from SP for ~$20, and then found another retailer soon after for a bit less. Maybe someone can chime in....
SP? please post a link. I couldn't find them anywhere. Thanks.
-
SP? please post a link. I couldn't find them anywhere. Thanks.
This is close but not exact as it does not have the mini(1/8") tip.
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-TOC-RA
I can't seem to find it on their site. Maybe they no longer carry it? I do remember it was real tough for me to find one when I was in the market, but it's certainly worth the search. I say, avoid adapters/connectors at all cost.
-
Here's what I ended up finding out after starting this thread:
Neither mcminone or SP have these cables anymore. The only vendor option I found for a new cable was to get the Sony brand sent from Japan. Luckily, a very kind member of this board sold me one that had been purchased back when they were still available. (by mcminone, I believe)
If the order is large enough, I got the feeling from the mcminone representative that they could do another production. Apparently, there isn't enough demand for this cable to keep it as a shelf item.
-
SP? please post a link. I couldn't find them anywhere. Thanks.
This is close but not exact as it does not have the mini(1/8") tip.
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-TOC-RA
That is exactly what I was looking for. RA on both ends. +T I couldn't find that shit.
-
Do you think I should stick with a higher end Toslink cable and scratch using the cheaper RA toslink all together. Here is what I was looking at: http://www.soundprofessionals.com/cgi-bin/gold/item/SP-TOC-99HQ (http://www.soundprofessionals.com/cgi-bin/gold/item/SP-TOC-99HQ)
-
Make sure you are getting a cable with the right type of connectors already on the ends NOLAfishwater. Adapters are just another thing that can go wrong or be not plugged in properly. Both of the last two hyperlinks have toslinks on both ends, not toslink on one end and miniplug on the other end.
What pieces of equipment are you using this cable to connect?
-
Shaggy from ts.com is in Japan and is generally willing to procure and ship stuff for other ts.com members. I'm certainly in no position to volunteer his services, but it can't hurt to shoot him a pm... :)
-
I just pm'd shaggy. I'll report back.
Shaggy from ts.com is in Japan and is generally willing to procure and ship stuff for other ts.com members. I'm certainly in no position to volunteer his services, but it can't hurt to shoot him a pm... :)
-
What pieces of equipment are you using this cable to connect?
V3, however if I decide to use a microtrack then I will only need optical for patchers.
-
I use it for optimod v3>pdaudio card
shaggy said:
I can do it, I will probably ask for about $30 shipped to cover the shipping and the hassle for goin into Tokyo to procure them
Who's down, i can help organize it and we can paypal shaggy directly ($32 ish)
What pieces of equipment are you using this cable to connect?
V3, however if I decide to use a microtrack then I will only need optical for patchers.
-
I use it for optimod v3>pdaudio card
shaggy said:
I can do it, I will probably ask for about $30 shipped to cover the shipping and the hassle for goin into Tokyo to procure them
Who's down, i can help organize it and we can paypal shaggy directly ($32 ish)
What pieces of equipment are you using this cable to connect?
V3, however if I decide to use a microtrack then I will only need optical for patchers.
how much does a PDA w/audio card and optical in cost?
-
I use the Monster THX I100FO optical cable w/ a mini plug adapter attached w/ electrical tape on one end.
Works great!
I have found that the cheap asss optical cables drop samples fairly easily. That's just my experiance though.
Good luck...
-
I use it for optimod v3>pdaudio card
shaggy said:
I can do it, I will probably ask for about $30 shipped to cover the shipping and the hassle for goin into Tokyo to procure them
Who's down, i can help organize it and we can paypal shaggy directly ($32 ish)
What pieces of equipment are you using this cable to connect?
V3, however if I decide to use a microtrack then I will only need optical for patchers.
I am in! Here is the link to the Japanese listing:
http://www.ecat.sony.co.jp/avacc/cord/acc/index.cfm?PD=1782&KM=POC-L10AB#top (http://www.ecat.sony.co.jp/avacc/cord/acc/index.cfm?PD=1782&KM=POC-L10AB#top)
-
hey y'all
I have one of the original Sound Professionals right angle > right angle mini. doesn't look like a "solid" cable but it has never let me down! looks like the little one posted but mini on one end. I have no need for it as I went 24 bit and not looking back. $25 paypal gets it shipped to your door. PM if interested.
Gordon
-
hey y'all
I have one of the original Sound Professionals right angle > right angle mini. doesn't look like a "solid" cable but it has never let me down! looks like the little one posted but mini on one end. I have no need for it as I went 24 bit and not looking back. $25 paypal gets it shipped to your door. PM if interested.
Gordon
I also have a backup Sound Professionals right angle > right angle mini never used. the I'll sell it for same deal as Gordon's. If anyone is interested PM me.
Edit: But buy buy Gordons first. Just trying to help out. I have 3 of them & have used the same one for 3 years.
-
Dude I wish you would have sent me one with my CA set up. Should have asked you.
-
hey y'all
I have one of the original Sound Professionals right angle > right angle mini. doesn't look like a "solid" cable but it has never let me down! looks like the little one posted but mini on one end. I have no need for it as I went 24 bit and not looking back. $25 paypal gets it shipped to your door. PM if interested.
Gordon
sold
-
hey y'all
I have one of the original Sound Professionals right angle > right angle mini. doesn't look like a "solid" cable but it has never let me down! looks like the little one posted but mini on one end. I have no need for it as I went 24 bit and not looking back. $25 paypal gets it shipped to your door. PM if interested.
Gordon
sold pending payment.
Payment sent! Thanks for the cable Gordon. +T for me not having to get a japanese translator to get the one over in Tokyo.