Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: cpclark on November 14, 2003, 04:15:53 PM
-
alright guys, used the v2 last night for the first time, just wondering how many decibels of headroom there are when hitting the +16db redlight on the level meters, and if the v2 is similar to the mp2 and have pre's that are very hard to clip when hitting that +16 db level, all thanks and appreciation for your help in advance
-chris
p.s.-i'd really love to know before tomorrow's umphrey's concert as i really need to know how far the v2 can be pushed because i like to push the limits on levels as i believe that gets the best tape in the end
-chris
-
no need to push the v2... crank the shit out of that ad500e....
but the V2 clips at +26 so you have 10dbs of headroom when those lights hit. But here's a warning from the sonicsense sight...
"Remember, however, that the V2 trim controls only affect the output of the unit and that the front panel meter are responding to the input gain. Thus, for each db of trim that you introduce, you are compromising the overall headroom (i.e. the 10db that you would typically have if the trim pots were all the way open to zero)."
-
cool, thanks tim, my mics put out a pretty hot signal, i had some good experience with my mp-2 at close proximity to the PA, i can get the vu meters pusing all the way across the scale, so the v2 has to be used at low gain, like last night all i could do was 15db of gain, no trim, and the green lights(-14db) were on the whole time with the red light coming on every so often, and the ad500e at about 3/4 of possible gain, but it al came out well and was very pleased with this combo, so thanks and +T for the info tim
-
no sweat...
search the Oade archives, there's tons of info out there on why you should run your preamp low and a/d high...
that's a sweet sounding setup!
-
V2 can be run hot or low, sounds just as good either way. If you are using an sbm-1 its best to run the V2 to the point so you are 5 or over on the sbm-1. With the mini-me or other back end a/d you can run the V2 hot or not, depends on what kind of sound you want.
-
How you like the sound of that V2 withthe AT's?
-Jim
-
How you like the sound of that V2 withthe AT's?
-Jim
couldnt be happier, crystal clear, not as much bass as the mp-2, but the ad500e makes up for, tweaks the sound just enough, i love this combo and i think you will be satisfied with the 4051 -> v3 combo for sure
-
Excellent!!!
Just waiting for insurance to get off their arses with replacing my stuff and getting cash...
-Jim