Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: ac on August 31, 2005, 06:36:27 PM
-
Is these a way to do turn AKG 300 series and caps into an active setup? Ghetto version not the MK 90/3 + H 98.
-
Someone here did hardwire a line soldering into the cap and then running it to a miniplug and battery box i think.
Other than that, I have tried before and failed because basically there is circuitry in the active cable that makes it work. If you wanted to try I was able to order parts (for a failed project) from akg USA, both ends of the AKG active cable and tried soldering my own cable in between. For some reason it did not work. They also only had enough for one cable.
-
So what the deal with the MK 90/3 + H 98? Is it just and extension and is that a mount attached to it? Is 10ft all you get on it?
-
So what the deal with the MK 90/3 + H 98? Is it just and extension and is that a mount attached to it? Is 10ft all you get on it?
basically it just seperates the caps from the bodies, some have the mount some don't. I just made a mount. it gives you 3 meters a bit mroe than 10ft
-
Someone here did hardwire a line soldering into the cap and then running it to a miniplug and battery box i think.
Other than that, I have tried before and failed because basically there is circuitry in the active cable that makes it work. If you wanted to try I was able to order parts (for a failed project) from akg USA, both ends of the AKG active cable and tried soldering my own cable in between. For some reason it did not work. They also only had enough for one cable.
That was me! Take a look at:
www.cs.uwaterloo.ca/~mannr/AKG
There you will find detailed mechanical and electrical drawings for the bodies and the capsules and a picture of my setup.
By the way, this was not my design. This is exactly what AKG did for a battery operated "field recording" rig. I don't think they sell this to end users though.
Oh yeah, how much are the bayonet connectors, the ones that go on the *capsule* end. I would really use a pair of those if I choose to do this with another set of caps.
Richard
-
Oh yeah, how much are the bayonet connectors, the ones that go on the *capsule* end. I would really use a pair of those if I choose to do this with another set of caps.
Richard
contact akg USA, they quoted me $100 for both ends of the active capsule so I imagine about $100 for the set.