Topic: Setup for one shock mount with 2 microphones Question (not active)

[beanstalk]

I saw a couple of months ago a setup for 2 mics with one shock mount (not active) and was wondering where it is or if some just had some info for me to set it up? I did a search and came up with nothing. I think they were 184. Any help would be great. Thanks all. 

[bhtoque]

I think Rob C started the post you are talking about. All you have to do is get a male threaded adapter and screw the two mic clips together, then put them in the mount. He was probably using an a-20, but it will also work with other shocks.

JAson

[bhtoque]

here's the thread I started-->  http://taperssection.com/index.php?topic=28738.0

+T for pulling up the thread.

JAson

[beanstalk]

Thanks

[chucky]

I also run my 184s using only 1 shockmount.
The shockmount is kinda like a clamp so I dont need
the threaded rod to keep em straight. I just clamp the stock
mounts in there and booom DINA 
I just use a thread adaptor to get the  extra 3 cm for DIN.

Also, you might have to run RA out of the mics to get 90.

[bhtoque]

yeah, to get this to work, you definately need right angle cables.

JAson

[Chuck]

Man, I'd like to make this work with my 480's...

[fozzy]

Man, I'd like to make this work with my 480's...

I don't think this would work for the 480s because they are about twice the length of the 184s