Become a Site Supporter and Never see Ads again!

Author Topic: Denecke Users (or former users)  (Read 2390 times)

0 Members and 1 Guest are viewing this topic.

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Denecke Users (or former users)
« on: November 15, 2007, 05:26:54 PM »
I have a PS-2 and soon to have an AD-20.  Is there a particular case or cases that work well for storage of these? (Pelican???)
« Last Edit: November 15, 2007, 08:09:14 PM by Belexes »
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline CTDave

  • Trade Count: (8)
  • Taperssection All-Star
  • ****
  • Posts: 1073
  • Gender: Male
Re: Denecke Users (or former users)
« Reply #1 on: November 15, 2007, 06:51:43 PM »
I only use my PS2>AD2 for stealth recordings, and it's funny, but I've never thought of keeping them stored in anything but the backpack that I store all my stealth gear in along with my trucker hat that I sewed velcrow into to hold my mics when recording. Everything I carry out on a stealth night is in that backpack. I have a nice Pelican for my AKG's and keep all my open taping gear in a fine 4 shelf Soniccase, but my AT853's I don't store in anything but the boxs they came in.....I should do something about that...
AKG C480b ck61/ck63 > Bumblebee Miagi-II cables > Grace Lunatec V3 > Edirol R-4

AT853RX > Denecke PS-2 > Denecke AD-20 > JB3

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: Denecke Users (or former users)
« Reply #2 on: November 15, 2007, 07:38:57 PM »
That's one heck of a stealth rig CTDave! I'd hate to crotch all that gear into a show.

I have a Lowe Pro bag on order and may just store the Denecke equipment in there as is, but if there is a nice Pelican out there that works either for both or each of them, I'd pick it up.

All my mic cables are stored in a black Shure zipper bag I got from Sound Professionals.  My R-09 is in a Bodyglove, the M1 in the pleather Sony case, the C4's in the SP flight case, and everything else I have is loose without protection.
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Denecke Users (or former users)
« Reply #3 on: November 15, 2007, 07:52:15 PM »
I used to crotch MBHO603a > ps2 > ad20 > m1 / MD all the time.
make some great recordings.

I have this combo still...although i've hacked them to both fit in one box.
;-)
I need to use that one of these days.  If only I had a recorder that took an optical signal.

those two units are so rugged, you really needent "baby" them.  You'd have to drop them out of a plane at 30k ' to even put a nic on the aluminum case.


Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: Denecke Users (or former users)
« Reply #4 on: November 15, 2007, 08:12:50 PM »
Geez, and I use to hate to crotch my old Sony D3 analog thinking THAT was bulky.  :o

I baby my gear too much probably, except for my old D7 that looked like it had been to hell and back with all the field use.
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline CTDave

  • Trade Count: (8)
  • Taperssection All-Star
  • ****
  • Posts: 1073
  • Gender: Male
Re: Denecke Users (or former users)
« Reply #5 on: November 15, 2007, 11:57:14 PM »
I've snuck my rig in for years, and a bunch of times this year. Dyaln and Costello, Roger Waters, Experience Hendrix, Zappa Plays Zappa.... I do crotch most of it myself. For the last two shows, I also brought in a Walmart battery and power splitter. I don't trust my JB3 batteries like I used to. I keep the AT853RX's, and these are unmodified 20 footers, coiled up with the splitter, and optical cable in one big ziplock baggie. I have the PS2 and AD20 vecrowed together back to back, with a couple rubber bands wrapped around for support, and a shoulder strap I rigged together. And I crotch that all myself most of the time with the JB3. I'd say 9 out of 10 times, my buddy who's with me, is wearing boxers and can't bring in shit!!!
AKG C480b ck61/ck63 > Bumblebee Miagi-II cables > Grace Lunatec V3 > Edirol R-4

AT853RX > Denecke PS-2 > Denecke AD-20 > JB3

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: Denecke Users (or former users)
« Reply #6 on: November 16, 2007, 07:32:51 AM »
Boxers!  ;D  Gotta wear 2 pairs of briefs and that'll do the trick.
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Denecke Users (or former users)
« Reply #7 on: November 16, 2007, 08:18:04 AM »
the key is "boxer briefs"
;-)

Offline bluntforcetrauma

  • Trade Count: (11)
  • Taperssection Member
  • ***
  • Posts: 879
  • Gender: Male
    • http://themovementschool.org
Re: Denecke Users (or former users)
« Reply #8 on: November 19, 2007, 12:16:26 AM »
I use the denecke PS2 with MIT HOsa transformers for 20db gain, i dont use the AD20, I use a Quantarey bag to hold all my rig stuff, but for stealthing i crotch then have long spandex pants to hold devices and cables in place , see sig line

 

RSS | Mobile
Page created in 0.123 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF