Become a Site Supporter and Never see Ads again!

Author Topic: JB3 mic in?  (Read 3862 times)

0 Members and 1 Guest are viewing this topic.

Offline divamum

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 411
JB3 mic in?
« on: March 08, 2005, 11:47:49 AM »
Hi all -

I'm sure this MUST have been discussed, but I couldn't find it (the term "mic in"  appears enough in this forum that when you search you get so many  hits it's not necessarily much better than reading backwards!)  Thanks in advance for your patience :)

I upgraded to the most current firmware (finally got this thing running, it would seem) and I note that in this version there are far more recording options, not least of which the gain choices and "mic in"

Does that mean there IS a built-in preamp in the unit? Or just that they have software-tweaked something? Or....?

Thanks for enlightening me. I was under the impression that the JB3 could ONLY go line-in, so I'm now thoroughly confused. 

Also, with the gain selections on the unit itself, can those be used in combination with an external pre, or are they exclusively for mic in, or....?

I'm sure these are the dumbest questions ever, but I'm trying to get to grips with this machine before an important rehearseal tonight and just need to get as much info as possible - I have to guesstimate levels (since it's superstealth and I daren't have the unit in open sight at all) and am just trying to figure out what I'm doing!!! 

Many thanks in advance -

M
DPA4060
R09

hexyjones

  • Guest
  • Trade Count: (0)
Re: JB3 mic in?
« Reply #1 on: March 08, 2005, 11:52:37 AM »
The general consesus is the mic in is unusable...it just sounds like crap no matter what...

If you use the analog in - just leave the levels set to the default (0db) and drive the unit with your preamp...only add gain on the JB3 if you absolutely must...

Offline kfrinkle

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2082
  • Gender: Male
    • Karl Frinkle Dot Net
Re: JB3 mic in?
« Reply #2 on: March 08, 2005, 11:55:02 AM »
I had the misfortune of taping A Perfect Circle and The Mars Volta via mic-in.  It took a ton of work to make the recording sound listenable.  Never ever touch mic-in on that beast!
« Last Edit: March 23, 2005, 10:12:43 AM by kfrinkle »
-Karl
MBHO KA200n's > Naiant Tinybox (v2.1) > Sony PCM-M10
http://tooldriveproject.net

Offline jaguaracer

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 127
  • Gender: Male
    • Trading List
Re: JB3 mic in?
« Reply #3 on: March 08, 2005, 08:34:02 PM »
I ha dthe misfortune of taping A Perfect Circle and The Mars Volta via line-in.  It took a ton of work to make the recording sound listenable.  Never ever touch mic-in on that beast!
Sorry to nitpick, but for the sake of clarity, you mean mic-in right.  :)
DC
________________________________________
Dont' cross the streams
Looking for: Tickets! gear JB3, mini cardiods, battery boxes.

Offline jkoch

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 855
  • Gender: Male
  • groovy!
Re: JB3 mic in?
« Reply #4 on: March 09, 2005, 01:32:58 AM »
when you go mic-in you use the jb3's internal preamp. this is not a wise move typically as 1) the preamp pretty much sucks and 2) it often sounds bad due to harddrive sound being picked up as well as other aspects.
Schoeps MK4s > active cables > NBox+ > Edirol R-09HR

Offline jcrab66

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1354
Re: JB3 mic in?
« Reply #5 on: March 23, 2005, 04:33:54 AM »
i used mic in for one stealth show and really it wasnt that much different then line in but was much more boomy. The internal preamp i have found to be ok for going positive line in up to +3 or 4 but the one time i went negative the recording didnt turn out well. I dont trust the JB3 preamp at all........
mk4's / mk41's > nbox > Microtracker / HDP2

Offline kfrinkle

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2082
  • Gender: Male
    • Karl Frinkle Dot Net
Re: JB3 mic in?
« Reply #6 on: March 23, 2005, 10:13:11 AM »
I ha dthe misfortune of taping A Perfect Circle and The Mars Volta via line-in.  It took a ton of work to make the recording sound listenable.  Never ever touch mic-in on that beast!
Sorry to nitpick, but for the sake of clarity, you mean mic-in right.  :)

Yeah, im so scarred from going mic-in, it was hard to write it... Thanks. :P
-Karl
MBHO KA200n's > Naiant Tinybox (v2.1) > Sony PCM-M10
http://tooldriveproject.net

Offline Nate

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1923
  • Gender: Male
  • I saw you dancing to Doreatha
Re: JB3 mic in?
« Reply #7 on: March 23, 2005, 06:01:38 PM »
So when I tape Duran Duran next week...I should use go CSB (battery box)>Line in on JB3?

urobouros

  • Guest
  • Trade Count: (0)
Re: JB3 mic in?
« Reply #8 on: March 23, 2005, 06:46:19 PM »
yup

Offline jcrab66

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1354
Re: JB3 mic in?
« Reply #9 on: March 25, 2005, 10:25:43 AM »
Duran Duran? Wow, i think i can honestly say I havent seen a Duran Duran boot in circulation......Ever..........
mk4's / mk41's > nbox > Microtracker / HDP2

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Re: JB3 mic in?
« Reply #10 on: March 25, 2005, 01:02:24 PM »
oh hold me back...
I'd recommend using the USB input for the Duran Duran show.

(was that out loud?)  ;)
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

Offline jcrab66

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1354
Re: JB3 mic in?
« Reply #11 on: March 26, 2005, 11:16:28 PM »
oh hold me back...
I'd recommend using the USB input for the Duran Duran show.

(was that out loud?)  ;)


yes it was, and a fine recommendation if i say so myself.... ;D
mk4's / mk41's > nbox > Microtracker / HDP2

 

RSS | Mobile
Page created in 0.061 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF