Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: 1st set only on August 19, 2005, 09:52:38 AM
-
I taped delf lastnight, ua5 to laptop via usb 24/96 and ran my JB3 as a backup. a comedey of errors ensued dead batteries, ua5 not being recognised, then recognied, hitting the 2 gig limit, not being able to save blah blah blah...
lastnihg twas not my night to tape at all.
this morn i try to see if my JB3 saved my ass. I try to turn it on... dead. if anyone can please help id much appreciate.
I have reset
taken batteries out put them back in
just used AC no battery
when plugged in the charge indicator doesnt even show.
It did take about a 6 inch fall lastnight but this thing has been through much worse.
any ideas?
-
Sounds like you have component trouble on the main pcb board. It doesn't take much of a shock/drop to break a few solder joints, especially after the unit has been running for a while and the circuit boards have warmed up. If you’re technically inclined, I would suggest stripping the unit down and have a look over the circuit board with an eye loupe. PM me if you'd like some help.
dB-
-
Ill take it in the lab later and see what i see