Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: vanark on March 23, 2008, 07:34:06 PM

Title: Storage for Church Audio caps
Post by: vanark on March 23, 2008, 07:34:06 PM

I recently acquired a set of omni caps to go along with my cardioid caps for my Church Audio CA-11 mics.  I wasn't quite sure where/how to store them.  I had them on my desk and sitting near them was an empty AO Safety earplug container.  Ear plugs used and long gone, but the container seemed like a good size for the caps.  Put a little foam in the bottom and top, tested it - looked and felt good.  A couple dabs of hot glue, some fleece to soften the lining some more, and a label.  Voila - a microphone cap storage case for my CA-11 caps.  To give some size perspective, the caps are 12 mm in diameter.  The small case is about 1.25" in diameter by about 0.5" high.

(http://i23.photobucket.com/albums/b374/vanark/IMG_3792.jpg)

(http://i23.photobucket.com/albums/b374/vanark/IMG_3791.jpg)

Title: Re: Storage for Church Audio caps
Post by: heyitsmejess on March 23, 2008, 07:37:30 PM

nice!