Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: timP on April 23, 2008, 05:47:37 PM

Title: AKG ck1x caps> lemosax Questions
Post by: timP on April 23, 2008, 05:47:37 PM
I am going to give running my ck1x caps into a lemo sax a shot.

Seems like it should work, but I have an email into sonosax. The 460 series takes a wide range of power, so hoping that isn't an issue.

I have an extra set of mk46 extension cables that I can hack, but I need to find the right lemo tip to plug into the SX-M2/LS.

 www.lemo.com/search/basic_search.jsp   is the place I started, but there are to many options to take a guess..


2nd question:  anyone out there up for the soldering work?

EDIT:  possible part # FFA.0S.116.CTAC32
it will be nice to ditch the bodies/pre and just run into an r-9.........
Title: Re: AKG ck1x caps> lemosax Questions
Post by: easy jim on April 23, 2008, 06:37:40 PM
^ try sending a PM to esteyes (see AKG actives project thread).  He has experience working on and repairing mk46 cables.
Title: Re: AKG ck1x caps> lemosax Questions
Post by: Brian Skalinder on April 23, 2008, 09:08:42 PM
I'd consider wiring the actives to the locking 5-pin binder instead of the (non-locking) lemo connectors.
Title: Re: AKG ck1x caps> lemosax Questions
Post by: timP on May 10, 2008, 05:35:17 PM
alright..


I now have a lemosax....


need to find someone to do the cable soldering work and give this a try
Title: Re: AKG ck1x caps> lemosax Questions
Post by: rokpunk on May 10, 2008, 06:05:37 PM
alright..


I now have a lemosax....


need to find someone to do the cable soldering work and give this a try

dude...bring it by the shop.
i'll help ya out.
Title: Re: AKG ck1x caps> lemosax Questions
Post by: NOLAfishwater on May 10, 2008, 08:02:29 PM
alright..


I now have a lemosax....


need to find someone to do the cable soldering work and give this a try

dude...bring it by the shop.
i'll help ya out.

Team Togetherness. nice offer Scott +T