Print Page - 3.5 mm Stereo: Tip and Ring are .......?

Title: 3.5 mm Stereo: Tip and Ring are .......?
Post by: bhadella on December 04, 2003, 12:58:56 PM

Is the tip the left channel and ring the right channels like a typical TRS on a D8? My 3.5 mm to RCA cable isn't labeled.....

Thanks

Title: Re:3.5 mm Stereo: Tip and Ring are .......?
Post by: sexymexi on December 04, 2003, 01:04:46 PM

test it, plug it into your stereo, then turn your stereo up a bit, and touch the tip with your finger, then touch the ring. see which it come out of left or right.. that should work, cause i can't remember off hand.. peace.

matt

Title: Re:3.5 mm Stereo: Tip and Ring are .......?
Post by: bhadella on December 04, 2003, 01:10:52 PM

I'm estranged from my stereo (travelling for work) and unable to play around to figure out which is which. I'm going to tape from a sbd this weekend and didn't want to get it wrong and end up having to swap channels in Cool Edit afterwards.......Thanks

Brian

Title: Re:3.5 mm Stereo: Tip and Ring are .......?
Post by: sexymexi on December 04, 2003, 01:13:01 PM

aight hold on, let me go into the other room and check mine. be back in a few.

Title: Re:3.5 mm Stereo: Tip and Ring are .......?
Post by: sexymexi on December 04, 2003, 01:17:11 PM

aight, on my PA running stereo, the tip is left and the ring is right. thats how it works here.. hope that helps man.. peace..

matt

Title: Re:3.5 mm Stereo: Tip and Ring are .......?
Post by: bhadella on December 04, 2003, 02:10:48 PM

Thanks!!!!

Title: Re:3.5 mm Stereo: Tip and Ring are .......?
Post by: leegeddy on December 04, 2003, 03:21:42 PM

Quote from: bhadella on December 04, 2003, 12:58:56 PM
Is the tip the left channel and ring the right channels like a typical TRS on a D8? My 3.5 mm to RCA cable isn't labeled.....

Thanks

the "R"ing is almost always "R"ight according to standard convention.

marc

Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: bhadella on December 04, 2003, 12:58:56 PM