Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Chanher on December 08, 2003, 12:55:48 PM
-
Is it possible to use the AT831 mini-condensers (with a SP Batt Box) and the pmod UA-5?
-
Is it possible to use the AT831 mini-condensers (with a SP Batt Box) and the pmod UA-5?
Yes. Just make sure you keep the phantom power OFF. Then you'll need to convert your mini-stereo plug to XLR so you can input to the pmod-UA5s preamps.
Don't know your situation, but if you're planning on buying a pmod-UA5, you may consider spending that money on upgrading mics, instead. In general, you get more bang for your buck with respect to sound improvements by upgrading mics vs. pre/ADC.
-
Just make sure you keep the phantom power OFF.
heh ehe heh
-
thanks Brian! :)
-
i actually think the at831's sound better than some of the more expensive lower end mics some people are using (oktava or c1000's). i've taped a lot of shows and listened to a lot of shows recorded w/ these mics and they sound pretty damn good! i've never ran my at933 (similar to the at831) w/ my pmod, but i bet it would sound pretty good together.
peace,
justin