Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: Brian on December 18, 2003, 11:39:20 AM
-
well i made the most bonehead move ever in my short taping career. I broke my 165 fuggin dollar oade active cable last nigt. I broke the 7pin end. the analog/digital switch broke off as well as one of the sides of it. Can anybody fix this by putting on a new sony 7pin head just like the one on the oade cable or do i have to shell out more dough that i don't have to get a new one. at least i can still tape just can't utilize the a/d in my ua5 as i will have to go RCA out to line in on my M1.
Thanks in advance for any help or info!
Dammit i'm an idiot.....
Brian
-
well i made the most bonehead move ever in my short taping career. I broke my 165 fuggin dollar oade active cable last nigt. I broke the 7pin end. the analog/digital switch broke off as well as one of the sides of it. Can anybody fix this by putting on a new sony 7pin head just like the one on the oade cable or do i have to shell out more dough that i don't have to get a new one. at least i can still tape just can't utilize the a/d in my ua5 as i will have to go RCA out to line in on my M1.
Thanks in advance for any help or info!
Dammit i'm an idiot.....
Brian
Are you sure it's non-functional? Do you still have the A/D switch? It's easily replaced, and the switch can still be triggered without it - albeit not easily in the field.
-
haven't tried it out yet, but the actual switch is broke off and gone. Couldn't fine the tiny bugger. I'll have to take another look at it and see if i can still switch. God i hope that it broke off permanently on digital and still works. Ic ould still use it until i get enough money to replace the 7pin head.
now if it doesn't work can i buy a new 7pin head and have someone solder it back on and still have the cable be 100% functional?
Brian
-
By the A/D switch, you mean the little grey jobbie, right? If so, you should still be able to reach in with a paperclip or something and flip the switch. As for soldering on a new 7-pin head, yeah, it could be done. That's how Oade and Pro-Dig make theirs, after all.
-
+T Brian. Thanks for the help and info. good to see that i'm not totally fucked. it just sucks though because that damn cable is expensive and i don't want to have to buy a new one of if don't have to. hopefully i won't.
-
why not give oade a call and see if they can fix it for you- should be something pretty minimal in cost
-
why not give oade a call and see if they can fix it for you- should be something pretty minimal in cost
Exactly. I lent my active out & well the shield was bent upon return. I tried my best to get it back to it's original shape, it was still off. I could get it in, but it was tight as all hell upon removing. Not something I wanted to do on a regular basis. I sent it to Oade & he replaced the shield for me with an extra he had. Works fine, BUT in the time it was out of commish, I bought a prodigital one, and I prefer this hands down over the oade version, HTH ...