hey
so
I am wondering what pins of the XLR connector to connect to a 1/4 TRS connector to make a balanced cable?
[on my Fostex FR2-LE- it shows for the XLR 1 ground 2 hot 3 Cold]
how does this relate to the TRS?
my understanding is that the tip is ground or common
and Ring is hot and sleeve is cold
but I have no idea
IO figure some one would know better than me
in my quick search here on TS I did not find clear info
thanx in advance
-- Ian
Usual:
T = + Plus or HOT
R = - Minus
S = C or GND
Quote from: guysonic on October 24, 2008, 06:29:35 AM
Usual:
T = + Plus or HOT
R = - Minus
S = C or GND
Yessir, that's how I recall them being wired. What I know for certain is that the sleeve is ground.
Quote from: jacobmyers on October 24, 2008, 07:04:07 AM
Quote from: guysonic on October 24, 2008, 06:29:35 AM
Usual:
T = + Plus or HOT
R = - Minus
S = C or GND
Yessir, that's how I recall them being wired. What I know for certain is that the sleeve is ground.
very good!
:)
thanx to both of you
(so my thoughts were totally wrong)
Quote from: Moke on October 24, 2008, 09:37:54 AM
we have a cable building thread in the ts.com archival section with cable building pointers.
Moke
thanx!
and I'll also look there
cool
-- Ian
I have a set of balanced TRS/XLR cables for sale. I've had them since I switched to the 722, but no one ever bought them.
Connector diagram...
http://www.montarbo.com/pdf/connettori.pdf
Quote from: J.T.L on October 25, 2008, 10:28:50 AM
Connector diagram...
http://www.montarbo.com/pdf/connettori.pdf
JTL
thanx!
WOW!
thats' totally what I needed!
very cool
and if I could give you a +T
I would
many thanx
-- Ian
Quote from: Moke on October 24, 2008, 09:37:54 AM
we have a cable building thread in the ts.com archival section with cable building pointers.
http://taperssection.com/index.php/topic,2473.0.html
(http://taperssection.com/index.php?action=dlattach;topic=2473.0;attach=61256;image)
rowjimmytour
very cool
thanx for that post!
-- Ian