Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: cleantone on November 20, 2008, 03:48:12 PM
-
I've been thinking about getting a two track bit bucket. I would prefer something 4 track but that doubles the cost if not more. I have been sort of sitting and waiting for these type of units to be inproved apon and to come down in price. The dust has settled a bit. What is the current deal? For the price is the Microtrack II a good unit? Are they blowing up or breaking down? Other concerns? How are the analog converters? I think I would be using it somewhat often as a two track backup type of thing. The batts last long enough? Do you need a card reader or can you dump via USB?
Thanks a lot!
-
I've been thinking about getting a two track bit bucket. I would prefer something 4 track but that doubles the cost if not more. I have been sort of sitting and waiting for these type of units to be inproved apon and to come down in price. The dust has settled a bit. What is the cuttent deal? For the price is the Microtrack II a good unit? Are they blowing up or breaking down? Other concerns? How are the analog converters? I think I would be using it somewhat often as a two track backup type of thing. The batts last long enough? Do you need a card reader or can you dump via USB?
Thanks a lot!
I've run my mt2 now pushing a year and am happy. The spdif digi in is perfect for my open setup and as a low pro rig, hasn't performed too badly. I'll soon be adding a ca9100 and think that it'll be a top notch setup both ways. IMO I've definately gotten my moneys worth. The battery lasts 4-6 hours and there are cheap backup batt options. Dumping by usb works fine. You should read through the other mt2 posts.
-
I'm a little confused. What is your intended usage? <1> Bit bucket (digital input), <2> ADC/recorder (analog input), <3> all-in-one recorder (pre, ADC, and record), or <4> some combination? It would be helpful to confirm since different recording devices offer different feature sets that may or may not be applicable to your intended usage.*
Also, do you have a budget? I assume in the ~$300 range, since you're considering the MT II?
* For example, the MT I/II may act as either a bit bucket or ADC/recorder, but doesn't really offer meaningful preamp features (though this may depend on the mics and recording scenario). The Edirol R-09 makes a nice ADC/recorder, but, like the MT I/II, doesn't have meaningful preamp features, nor can it act as a bit bucket since it has no digital input. The Tascam HD-P2 will act as a bit bucket, ADC/recorder, or all-in-one recorder (phantom power, preamp, ADC, and recorder).
-
depends on what your real use is gonna be clinton. I know you, and you may be turned of by how 'consumer' it is. the new marantz 661 is gonna be a smoking bit bucket I bet, but it will be about twice the price and twice the size. the microtracks never moved me much... while I have your attention, why don't you come down to the farm on saturday!
-
Well I was asking about the AD because sometimes I would use it for that. Not for mic pre's though. Didn't even think to mention that. I almost never record two track anymore. I have a few two channel preamps with AD's that would obviously be a good option to feed the unit. Most of the time I am using all of my preamps on individual inputs and in those cases might use it to grab a submix coming from an analog source. If I had the unit I might bring out a small rig more often. My current small rig is often too big to deal with for shows that I am not worried about recording. But if I had a little rig I might more often bring a rig out to see friends play and such. Or to patch (from rigs or sbd) for shows I didn't plan to record. There have been a lot of times that I am doing FOH or monitors and have wished that I had something small to run some signal to.
The price is a factor. Maybe I should just think about going a little bit bigger and getting a 4 track or something like the Marantz. Thanks guys!
Kris - Farm has shows on Saturdays now? Interesting. I don't think I have plans. Maybe I should think about that.
-
Kris - Farm has shows on Saturdays now? Interesting. I don't think I have plans. Maybe I should think about that.
now that the summer is over, the shows move to saturday evenings indoors. way more intimate. check out the Tyrone thread...
http://taperssection.com/index.php/topic,113208.0.html
... Hope to see ya there.
-
My short-list for these devices was the Olympus LS-10, Edirol 09-HR and Sony PCM-D50. These seemed to be better than the others - I eventually went for the Olympus, mainly because of its handling qualities and build quality.
But if you want 4-track, the Edirol R-44 is very affordable and also very good.
-
If your gear provides optical out, I'd strongly recommend the Sony D50 over the MT. I own the D50, and owned a MTI for years. The MTII could be a lot better, but from the posts about it I don't think it improved that much. The D50 is a much more reliable deck, much better internal battery powering, and has a better analog/AD path.
If you're thinking about the D50, check out this thread:
http://taperssection.com/index.php/topic,113385.0.html
Again, I've got no affiliation, but had a good transaction with this seller, and with the ebay/live.com cashback deal, you can pick up the D50 for $300.
-
im afraid i dont think that the MT2 is any good. maybe it was just mine that had something wrong, i dont know but this year i lost a third of my recording because the MT2 did not save them properly. this was never because the battery ran out, nor for faulty CF cards/ i always used kingston cards which are still perfectly working with othe devices.
at the beginning i went for the MT2 because the various types of inputs it has, but in my opinion it fails in reliability. i have now sold it and got myself a r-09hr...