Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: OOK on January 17, 2009, 12:46:51 PM

Title: Nak CM300 into a 702? Next Question?
Post by: OOK on January 17, 2009, 12:46:51 PM
Has anyone used this combination? I recently pick up a pair of nice cm300's.  What is the  best way to run these.  Through the mic pre's with phantom turned off or through the pre's switched to line input and adjust gain that way?

an inquiring mind wants to know?

Peace  ;D OOK
Title: Re: Nak CM300 into a 702?
Post by: Kyle on January 17, 2009, 12:55:58 PM
Mic-in with +48 turned OFF. Use your round 9v batteries for the Nak's and you are off and running..
Title: Re: Nak CM300 into a 702?
Post by: run_run_run on January 19, 2009, 01:24:12 PM
I support this plan. Just don't fry them with phantom.  On the LMA there is this 300 Gun ~> V3 ~> 7XX source that is smokin.
Title: Re: Nak CM300 into a 702? next question?
Post by: OOK on January 19, 2009, 07:37:19 PM
next question?  -10db pad on or off?
 ;D
Peace OOK
Title: Re: Nak CM300 into a 702? Next Question?
Post by: SmokinJoe on January 19, 2009, 10:32:49 PM
Definitely no pad required.  Naks are a relatively low output mic, so you need gain.
Title: Re: Nak CM300 into a 702? Next Question?
Post by: run_run_run on January 20, 2009, 04:54:18 PM
Definitely no pad required.  Naks are a relatively low output mic, so you need gain.
:lol: you would only need the pad for like death metal. 
Title: Re: Nak CM300 into a 702? Next Question?
Post by: OOK on January 20, 2009, 05:04:54 PM
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK
Title: Re: Nak CM300 into a 702? Next Question?
Post by: run_run_run on January 20, 2009, 05:16:08 PM
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK
cool let us know how it goes.  Omnis up front can be pretty bad ass
Title: Re: Nak CM300 into a 702? Next Question?
Post by: Gil on January 21, 2009, 02:31:10 PM
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.
Title: Re: Nak CM300 into a 702? Next Question?
Post by: OOK on January 21, 2009, 04:17:56 PM
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.

Yeah I seem to remember something about this......you need to get back east man.....or I need to get west...

Didn't you have a oh sh** moment that night....... >:D
Title: Re: Nak CM300 into a 702? Next Question?
Post by: Gil on January 21, 2009, 04:21:47 PM
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.

Yeah I seem to remember something about this......you need to get back east man.....or I need to get west...

Didn't you have a oh sh** moment that night....... >:D

Absolutely. You need to keep me posted about Jazz Cafe shows. Everything but Moon Boot flies under my radar. And there's always a place to crash in the burgh for you.

I thought I did. Recovered nicely though  ;D
Title: Re: Nak CM300 into a 702? Next Question?
Post by: OOK on January 21, 2009, 04:39:54 PM
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.

Yeah I seem to remember something about this......you need to get back east man.....or I need to get west...

Didn't you have a oh sh** moment that night....... >:D

Absolutely. You need to keep me posted about Jazz Cafe shows. Everything but Moon Boot flies under my radar. And there's always a place to crash in the burgh for you.

I thought I did. Recovered nicely though  ;D

Will do............