I can make any of the following mounts for Neumanns
DIN
DINa
NOS
ORTF
M/S
Please let me know what you want in specific by email only: louie.liokis @ gmail dot com
in the subject line put: Neumann Mount
Update 4/8/09: I just picked them up and they are ready to ship.
DINa
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DINa.jpg)
ORTF
(http://i140.photobucket.com/albums/r38/NOLAfishwater/ORTF.jpg)
DIN
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DIN.jpg)
NOS
(http://i140.photobucket.com/albums/r38/NOLAfishwater/NOS.jpg)
MIDSIDE
(http://i140.photobucket.com/albums/r38/NOLAfishwater/MIdside.jpg)
(http://i140.photobucket.com/albums/r38/NOLAfishwater/Midside2.jpg)
Quote from: NOLAfishwater on February 05, 2009, 05:50:04 PM
I am thinking about making just the following bars for Neumanns
DIN
DINa
NOS
ORTF
M/S
Please let me know what you want in specific by email only: louie.liokis @ gmail dot com
in the subject line put: Neumann Mount
Once I have received enough interest I will entertain the idea of making some.
As of now I can probably just make the M/S bar.
MS bar would be sweet. I saw the picture of the schoeps one. I would guess if its held tight at the top with the rubber band, both schoeps and neumanns will fit in the bar...
here's your email :P
i want a NOS one
like I said. please email me :P that is the only way I can keep track of all of yous.
what kind of prices would we be looking at?
email sent! M/S and ORTF. Yer welcome to borrow my caps and actives for a few weeks as well.
Quote from: philR on February 05, 2009, 06:05:23 PM
what kind of prices would we be looking at?
I don't know, b/c I don't even have enough interest to get pricing. Let me know what you are interested in.
Email sent. ORTF! :P
Come on people. So far I only have interest in the following:
4 ORTF burgin, bhadella, dgale, mcraig
2 NOS dgale, gordon, rob D.,
2 M/S burgin, mcraig
1 DIN dgale
1 DINa dgale
I need at least 5 of each to make a run.
Actually I should be down for one of each except the ORTF, so add me to the M/S list and delete me from the ORTF list. Thanks.
email sent: DIN and ORTF
4 ORTF burgin, bhadella, mcraig, dmonkey
3 NOS dgale, gordon, rob D.,
4 M/S burgin, mcraig, dgale, steve j
3 DIN dgale, dmonkey, steve j
2 DINa dgale, steve j
prices are $75 each. discounts on quantity are given.
Quote from: NOLAfishwater on February 28, 2009, 05:41:41 PM
4 ORTF burgin, bhadella, mcraig, dmonkey
3 NOS dgale, gordon, rob D.,
4 M/S burgin, mcraig, dgale, steve j
3 DIN dgale, dmonkey, steve j
2 DINa dgale, steve j
prices are $75 each. discounts on quantity are given.
Do we have a 5th person for the ORTF bars yet? :drool:
FWIW Louie, as much as I read TS.com, today is the first I ran across your announcement because I just don't look for gear related stuff in the open forum and, honestly, I don't spend much time at all in the open forum. I also know that there are others that avoid it like the plague because of so many politically charged threads.
I wouldn't be so sure that people are getting the word on this.
Email sent. Definately m/s, potentially one of each. The budget will decide...
Looks like dgale backed out
4 ORTF burgin, bhadella, mcraig, dmonkey
2 NOS gordon, rob D.,
3 M/S burgin, mcraig, steve j,hubbachild
2 DIN dmonkey, steve j
1 DINa steve j
prices are $75 each. discounts on quantity are given.
Quote from: hubbachild on March 13, 2009, 01:04:31 AM
Email sent. Definately m/s, potentially one of each. The budget will decide...
never got your email
Update: Looks like there are enough for M/S and ORTF. My guess is it will probably be mid April before these are finished
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine
3 NOS gordon, rob D.,ncknottypine
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
2 DIN dmonkey, steve j
1 DINa steve j
prices are $75 each. discounts on quantity are given.
would this bar be for the KM180 series at all?
Quote from: jkm78 on March 16, 2009, 11:26:41 PM
would this bar be for the KM180 series at all?
these will only be compatible with the active cable. sorry
Quote from: NOLAfishwater on March 15, 2009, 11:45:32 AM
Update: Looks like there are enough for M/S and ORTF. My guess is it will probably be mid April before these are finished
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine
3 NOS gordon, rob D.,ncknottypine
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
2 DIN dmonkey, steve j
1 DINa steve j
prices are $75 each. discounts on quantity are given.
Thanks Louie for helping out us Neumann owners. Do you need payment before hand?
Mikey
I met with the design engineer today. Finalized the last couple of templates. Everything should be done in the next 30 days.
email sent ORTF DIN & NOS
Quote from: NOLAfishwater on March 17, 2009, 11:51:08 AM
Quote from: jkm78 on March 16, 2009, 11:26:41 PM
would this bar be for the KM180 series at all?
these will only be compatible with the active cable. sorry
KM 180-D series have removeable heads - OK with these?
Also - any useable with Sennheiser MKH 8000 series?
Please ........... ;D
Update: Unless I get more interest on the DINa, I am probably going to cut it from this run. My guess is it will probably be mid April before these are finished
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine,neptune
3 NOS gordon, rob D.,ncknottypine,neptune
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
2 DIN dmonkey, steve j,neptune
1 DINa steve j
prices are $75 each. discounts on quantity are given.
Update: Unless I get more interest on the DINa, I am probably going to cut it from this run. My guess is it will probably be first week of April before they are done. Since I have committed financially to the project, I need to start accepting payments for them.
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine,neptune
4 NOS gordon, rob D.,ncknottypine,neptune
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
3 DIN dmonkey, steve j,neptune
1 DINa steve j
prices are $75 each. discounts on quantity are given.
Thanks to everyone who sent payment. Still have the following stock:
1 x NOS
2 x DIN
4 x DINa
I have two omni bars that will work with the Neumanns. Each bar has two different spacing options 17" (43cm) and 20" (51cm). There is a 3rd inner inner hole but is too small for the Neumanns and will only fit the Schoeps. Price is $125. Let me know.
Are you treating my Neumanns nice Louie? Give em a kiss for me. :P
Quote from: Mark Burgin on March 25, 2009, 06:02:28 PM
Are you treating my Neumanns nice Louie? Give em a kiss for me. :P
they might be a little sticky when they get back to you >:D
production started on them today.
Just picked them up. I will ship them all out in the morning
DINa
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DINa.jpg)
ORTF
(http://i140.photobucket.com/albums/r38/NOLAfishwater/ORTF.jpg)
DIN
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DIN.jpg)
NOS
(http://i140.photobucket.com/albums/r38/NOLAfishwater/NOS.jpg)
MIDSIDE
(http://i140.photobucket.com/albums/r38/NOLAfishwater/MIdside.jpg)
(http://i140.photobucket.com/albums/r38/NOLAfishwater/Midside2.jpg)
;D
just got my NOS bar and it's very nice! I gotta say the caps fit a bit snugger (in a good way) in the bar than in my kwon din bar ;D
Yep. I'm very happy with the ortf. So nice to have a real one again besides my ghetto version. ;D Thanks to Louie. Now I need an AK20 for the ms mount. (which is great, perfect, etc) :P
Quote from: Gordon on April 14, 2009, 02:21:51 AM
just got my NOS bar and it's very nice! I gotta say the caps fit a bit snugger (in a good way) in the bar than in my kwon din bar ;D
that is what I was going for. you can always add one rubber seal to make it extra secure.
Quote from: Mark Burgin on April 14, 2009, 02:30:27 AM
Yep. I'm very happy with the ortf. So nice to have a real one again besides my ghetto version. ;D Thanks to Louie. Now I need an AK20 for the ms mount. (which is great, perfect, etc) :P
glad you like it. now go find an AK20. I want to hear some midside pickin
just got mine yesterday and they look sweet
cant wait till this weekend to test them out
any of you Neumann owners interested in making some of these?
Quote from: NOLAfishwater on December 07, 2010, 09:02:56 PM
any of you Neumann owners interested in making some of these?
I'm interested in NOS and ORTF (and possibly DIN).
I am thinking of making another batch, please see the thread in the retail section for instructions on reserving a set. http://taperssection.com/index.php?topic=156323.0