Taperssection.com

Gear / Technical Help => Cables => Topic started by: NOLAfishwater on February 06, 2009, 11:14:59 AM

Title: ISO: 48V to 12V adapter cable for CMC4
Post by: NOLAfishwater on February 06, 2009, 11:14:59 AM

I just picked up some CMC4's and was wondering if there is someone has any experience building these cables and if so, can you make it stubby on one end? Found the adapter http://www.trewaudio.com/store/product.php?productid=319&cat=0&page=1#detail but wanted something lighter.

Title: Re: ISO: 48V to 12V adapter cable for CMC4
Post by: ghellquist on February 07, 2009, 08:09:07 AM

Suggested circuit here.
http://www.uneeda-audio.com/phantom/p48t122.jpg

Title: Re: ISO: 48V to 12V adapter cable for CMC4
Post by: NOLAfishwater on February 07, 2009, 11:19:06 AM

thanks! now, can someone wire this up?

Title: Re: ISO: 48V to 12V adapter cable for CMC4
Post by: jkm78 on February 07, 2009, 06:05:04 PM

Quote from: NOLAfishwater on February 07, 2009, 11:19:06 AM

thanks! now, can someone wire this up?

i can ask my technician to make this into a cable if you want or something other than a barrel....just let me know your thoughts....

Title: Re: ISO: 48V to 12V adapter cable for CMC4
Post by: Shawn on February 07, 2009, 06:43:47 PM

Louie, do the bodies have a blue dot near the XLR connector? if so the item you linked won't work without modification.

Title: Re: ISO: 48V to 12V adapter cable for CMC4
Post by: SmokinJoe on February 07, 2009, 10:54:19 PM

Call Grace Design....  I think maybe you can move some jumpers inside the V3 so it will run the "parallel power", or whatever it's called.  In the manual they say "call us".