Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Hman on February 11, 2009, 06:19:31 AM
-
Was wondering if some people are running this rig (or have run in the past):
AT853 > Aerco MP2 > rec.
What about it? Is it a solid stealth rig?
Are there any special things you need to add to the mics and pre?
And when eventually upgraded to DPA4023 > MP2.. easy to do??
Like to know..
-
Myco or Spyder9 have run this I believe. I think in both cases this was their "less than open" rig.
-
Ran it with the at853rx > aerco
very nice setup, not as detailed as the mk-4 or 4023
spyder9 made some great tapes
with this setup (one of the reasons i tryed it)
4023's>aerco is a killer combo
check these:
http://www.archive.org/details/hcr2008-10-16.dpa4023.flac16
http://taperssection.com/index.php/topic,116859.0.html
-
I've run the AT853RX > Aerco > R09 many times and loved the sound. Its a solid stealth rig for sure.
-
Was wondering if some people are running this rig (or have run in the past):
AT853 > Aerco MP2 > rec.
What about it? Is it a solid stealth rig?
Are there any special things you need to add to the mics and pre?
And when eventually upgraded to DPA4023 > MP2.. easy to do??
Like to know..
I'm in the same boat...looking for a good transformer based pre to put behind my AT U853s. You will need phantom adapters like the AT8533, Samson PM4, or Nady CBM-40T. Also, you might want to consider the Sound Devices Mixpre. These are some archive recordings that were apparently recorded by the poster above (thanks to him):
http://www.archive.org/details/btf2007-02-21.spyder9.flac16
http://www.archive.org/details/dtb2008-04-10.spyder9.flac16