Taperssection.com

Gear / Technical Help => Cables => Topic started by: Teen Wolf Blitzer on March 10, 2009, 04:10:04 PM

Title: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: Teen Wolf Blitzer on March 10, 2009, 04:10:04 PM: Do they even make those? Anyone wanna do it for me? ;D On the mic end only.
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: H.A.V.E. on April 07, 2009, 10:07:07 AM: Hi Mark,

Yeah, H.A.V.E. (Hudson Audio Video Enterprises) does custom cable assembly work such as right angled 7 pin Neutriks with tube mic cables.

Contact Fritz, 800-999-4283, ext. 236
http://store.haveinc.com/default.aspx
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: darktrain on April 07, 2009, 10:21:28 AM: Quote from: H.A.V.E. on April 07, 2009, 10:07:07 AM
Hi Mark,

Yeah, H.A.V.E. (Hudson Audio Video Enterprises) does custom cable assembly work such as right angled 7 pin Neutriks with tube mic cables.

Contact Fritz, 800-999-4283, ext. 236
http://store.haveinc.com/default.aspx

3 posts, 3 solicitations, time top take it to the retail thread H.A.V.E.
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: H.A.V.E. on April 07, 2009, 10:34:36 AM: whoops- sorry guys, reading the terms, I thought solicitation: bad, suggestions to question: OK

- no? apparently not...sorry
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: H.A.V.E. on April 07, 2009, 11:09:16 AM: Thanks, Moke!

I posted in the appropriate retail section now- thanks!

Although my background is in audio production, I'd say I'm only intermediatel in the details of interconnect design and specs- there's plenty I can learn. So I hope to be able to learn a bit here, and perhaps chime in appropriately if I can.

I've worked in CD/DVD duplication/replciation, printing for years, and was a mastering engineer in NYC and San Francisco. Currently I do a lot of side recording projects, using mostly P.T. LE, 002R, Mackie 1604VLZ, AT4033, Ensoniq EPS, Yamaha RY30, Fender Rhodes (with a middle C tine cut to an F- darn!).

Fritz
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: goodcooker on April 07, 2009, 01:52:04 PM: Quote from: Mark Burgin on March 10, 2009, 04:10:04 PM
Do they even make those? Anyone wanna do it for me? ;D On the mic end only.

Mark

If you haven't found anyone to do this for you yet I'll be happy to.
If you buy the connectors and send them to me with the cables I'll do it for shipping.
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: tgakidis on April 07, 2009, 01:56:05 PM: Quote from: goodcooker on April 07, 2009, 01:52:04 PM
Quote from: Mark Burgin on March 10, 2009, 04:10:04 PM
Do they even make those? Anyone wanna do it for me? ;D On the mic end only.

Mark

If you haven't found anyone to do this for you yet I'll be happy to.
If you buy the connectors and send them to me with the cables I'll do it for shipping.

+t for the offer Roger!
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: Teen Wolf Blitzer on April 07, 2009, 02:09:29 PM: Thanks guys. Brian DaSilva is putting stubbies on my Atlas Quadstars for me. Stubby 7 pins! :o
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: dennisrtyler on April 07, 2009, 02:26:24 PM: Quote from: Mark Burgin on April 07, 2009, 02:09:29 PM
Thanks guys. Brian DaSilva is putting stubbies on my Atlas Quadstars for me. Stubby 7 pins! :o
i wanna see those! and hear the tubes. ;)
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: Teen Wolf Blitzer on April 07, 2009, 02:28:32 PM: Just finishing up the recording from a few weeks ago. Will seed tomorrow 100% sure. Sorry for the delay Dennis. Couldn't get it done prior to Disneyland. I tried. :P
Title: Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
Post by: dennisrtyler on April 07, 2009, 02:30:56 PM: Quote from: Mark Burgin on April 07, 2009, 02:28:32 PM
Just finishing up the recording from a few weeks ago. Will seed tomorrow 100% sure. Sorry for the delay Dennis. Couldn't get it done prior to Disneyland. I tried. :P
;D i'm sure it will be worth the wait. thanks Mark!