Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: dennisrtyler on April 01, 2009, 12:43:39 PM

Title: Sonosax SX-M2 Users Step Inside
Post by: dennisrtyler on April 01, 2009, 12:43:39 PM

have you ever run omnis with your sax? if so, what were your thoughts?

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: NOLAfishwater on April 01, 2009, 12:47:17 PM

I ran omni's onstage with the Lemosax and it sounded allsum. Huge soundstage.

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: dennisrtyler on April 01, 2009, 12:57:03 PM

Quote from: NOLAfishwater on April 01, 2009, 12:47:17 PM

I ran omni's onstage with the Lemosax and it sounded allsum. Huge soundstage.

i'm debating whether to run it with the omnis in OB or just go straight 702. my only worry is that it might add a little too much punch. i could be crazy.

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: rich on April 03, 2009, 01:55:52 PM

fwiw...i ran mk4's > 702 last year from almost dead center and 15 rows behind the board...the recordings i made could use a little more punch...more punch i say. run the sax.

rich

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: cfox on April 08, 2009, 10:06:31 AM

Be careful with the low end on omnis, with the sax or 702, I would def listen to a few selections with rolled off low end before seeding the omnis straight up...

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: dennisrtyler on April 08, 2009, 10:18:42 AM

there will be roll-off and who said anything about seeding them by themselves? ;)

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: cfox on April 08, 2009, 11:49:42 AM

Quote from: dennisrtyler on April 08, 2009, 10:18:42 AM

there will be roll-off and who said anything about seeding them by themselves? ;)

2s+4022+4028 ??

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: dennisrtyler on April 08, 2009, 11:52:30 AM

2s+ccm4 via c-link ;D

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: Jamie on April 08, 2009, 06:02:09 PM

I've run 462s>sax>ADK>D8 and 462s>sax>ACM PMD660 (it used to be yours  ;)) and prefer to roll off the low end with the pad on the mics, especially if you spread them more than 5 or 6 feet.
Jamie

Title: Re: Sonosax SX-M2 Users Step Inside
Post by: dennisrtyler on April 09, 2009, 11:27:44 PM

Quote from: Jamie on April 08, 2009, 06:02:09 PM

I've run 462s>sax>ADK>D8 and 462s>sax>ACM PMD660 (it used to be yours  ;)) and prefer to roll off the low end with the pad on the mics, especially if you spread them more than 5 or 6 feet.
Jamie

:coolguy: