Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: sneakypete on July 28, 2009, 04:12:46 PM

Title: Edirol for beginners
Post by: sneakypete on July 28, 2009, 04:12:46 PM
Hi everyone - I'm a new boy here - although I've been taping shows in one form or another since 1982.

I've been thinking about replacing my trusty minidisc recorder which has served me well for the last 12 years, with one of those hard drive recorders (Edirol?) and was just looking for a bit of advice about where to start looking. Budget wise I suppose I'm looking at spending about £250 - £300........

Are they easy to use ?
Can you adjust the recording levels whilst recording ?
Any tips gratefully received  :)

kind regards

sneakypete
     
Title: Re: Edirol for beginners
Post by: Nielsen81 on July 28, 2009, 05:12:23 PM
http://www.amazon.com/Edirol-R-09HR-High-Resolution-WAVE-Recorder/dp/B0016MLUKU

This is where I have planned to buy my Edirol :)
Title: Re: Edirol for beginners
Post by: acidjack on July 28, 2009, 05:20:15 PM
Hi everyone - I'm a new boy here - although I've been taping shows in one form or another since 1982.

I've been thinking about replacing my trusty minidisc recorder which has served me well for the last 12 years, with one of those hard drive recorders (Edirol?) and was just looking for a bit of advice about where to start looking. Budget wise I suppose I'm looking at spending about £250 - £300........

Are they easy to use ?
Can you adjust the recording levels whilst recording ?
Any tips gratefully received  :)

kind regards

sneakypete
     

I am not familiar with MD, but going from DAT to R-09HR was a great switch.  The answers to your questions are yes, you can adjust levels and yes, it is very easy to use. Pretty much just hit the rec button and forget.  Also remember that thanks to being able to post-process the files, there is usually less need to adjust levels while recording - just peak it out around -12 or so and raise the levels in post. 

One other thing I recommend, depending upon your application and mics, is to cover the switches on back  (except for HOLD) that you won't use with tape (I use black electrical tape).  Leave the switches at Mic Power OFF, Limiter OFF, Mic Sens LOW and cover them up.  That way a) HOLD is easier to find if you're recording in the dark or somewhere where you can't as easily look at the unit - one downside of the R-09HR is it is easier to hit STOP and not feel it stop since you won't physically feel the unit stop like you would on a DAT and b) you won't accidentally flip a switch that will likely ruin your recording. 

I also prefer to cover the mic in jack, since I use the line-in for everything.  Of course, if you are not using a preamp or a battery box, then you'll need that mic in jack. 
Title: Re: Edirol for beginners
Post by: sneakypete on July 29, 2009, 12:30:34 AM
thanks for the info acidjack
do you use an external mic or the built in one ?
if external, which do you recommend ?
Title: Re: Edirol for beginners
Post by: sunjan on July 29, 2009, 02:51:29 AM
Stealth taping is all about external mics at strategic locations.  ;)

The best bang for the puck here is generally considered to be the CA-14 + CA-9100 combo.
Look at the retail section for current price point...
Title: Re: Edirol for beginners
Post by: Brian Emerick on August 05, 2009, 12:18:40 PM
Stealth taping is all about external mics at strategic locations.  ;)

The best bang for the puck here is generally considered to be the CA-14 + CA-9100 combo.
Look at the retail section for current price point...

that's what I've got coming :)

Just got my Edirol R09-HR in the mail.  This this is tiny!  same size is my ipod, just thicker.  Crazy!