Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: fsulloway on January 26, 2004, 04:48:35 PM
-
I was wondering if anybody is using this adjustable T bar with their schoeps. If so, how do you like it?
-
Though I dont use schoeps bar, its design is awesome!! However, for a similiar and MUCH less alternative, the VARK bar is almost the same, except you have to move the screws, rather than a swivle design.
-
i second that - great design! if it were cheaper I would own one for my setup (not schoeps)
doesn't address your question exactly, but I thought I would comment
-
I run the m100c with AKG caps. and really like the ease of setting up your configs. Three negatives, however, are:
1. To shock mount it using one a20s, you need to have this little barrel insert to go in the mount, then you need to run the m100c at 90 degrees...this makes for a somewhat flimsy mount--the m100c is kind of heavy and that plus caps, all being held by one a20s and with all the weight out in front of the a20s makes things a bit precarious.
2. It's not really low profile...it is not hat-able like some of the fixed bars are.
3. I also wish it could extend farther so you could achieve a little more space between the caps.
-Charlie