Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Buzzy on December 03, 2009, 12:37:18 AM
-
Hello everyone,
Recently I purchased a light stand from B & H photo (http://www.bhphotovideo.com/c/product/546528-REG/Manfrotto_by_Bogen_Imaging_368B_368B_Basic_Black_Light.html#reviews (http://www.bhphotovideo.com/c/product/546528-REG/Manfrotto_by_Bogen_Imaging_368B_368B_Basic_Black_Light.html#reviews)) that Im using to hold light reflectors. I would also like to use it for my CA-14 Cardioid's and CA-14 Omni mics. The stand is 11.3' at maximum height and comes with a 5/8" stud at the top of the extension.
Is there some type of cross bar I can purchase to fit the stand or is it something I would have to make myself. Thanks for your time.
Frank
-
Hello everyone,
Recently I purchased a light stand from B & H photo (http://www.bhphotovideo.com/c/product/546528-REG/Manfrotto_by_Bogen_Imaging_368B_368B_Basic_Black_Light.html#reviews (http://www.bhphotovideo.com/c/product/546528-REG/Manfrotto_by_Bogen_Imaging_368B_368B_Basic_Black_Light.html#reviews)) that Im using to hold light reflectors. I would also like to use it for my CA-14 Cardioid's and CA-14 Omni mics. The stand is 11.3' at maximum height and comes with a 5/8" stud at the top of the extension.
Is there some type of cross bar I can purchase to fit the stand or is it something I would have to make myself. Thanks for your time.
Frank
(http://www.micsupply.com/newstandfitting.jpg)
http://www.micsupply.com/standaccessories.htm
-
This then on top of that for a cheap way out.. or just diy it with a broken ruler..
(http://www.bhphotovideo.com/images/images345x345/400120.jpg)
http://www.bhphotovideo.com/c/product/400120-REG/On_Stage_MY500_MY_500_Stereo_Microphone_Mount.html
-
Hello everyone,
Recently I purchased a light stand from B & H photo (http://www.bhphotovideo.com/c/product/546528-REG/Manfrotto_by_Bogen_Imaging_368B_368B_Basic_Black_Light.html#reviews (http://www.bhphotovideo.com/c/product/546528-REG/Manfrotto_by_Bogen_Imaging_368B_368B_Basic_Black_Light.html#reviews)) that Im using to hold light reflectors. I would also like to use it for my CA-14 Cardioid's and CA-14 Omni mics. The stand is 11.3' at maximum height and comes with a 5/8" stud at the top of the extension.
Is there some type of cross bar I can purchase to fit the stand or is it something I would have to make myself. Thanks for your time.
Frank
Sound Pros also makes an item called the SP-GNA-2 that I find very convenient. It's flexible and can be morphed into any pattern. I use it with AT 853s, but I know other TSers have used it with CA-14/11 in the past as well.
-
The SP-GNA-2 should be what I'm looking for. Thanks guys...