Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: mrko5 on March 08, 2010, 01:35:31 PM
-
Hey guys,
I've had my Zoom H2 for about 6 months now, and I've noticed it has started taking about 36 seconds to boot up, rather than about 5. It also resets the date/time each time, which is very frustrating.
I tried to update it from 1.4 to 1.8, but where the version number should be in the update was just ****, and then it errors.
Would anyone be able to help/have had a similar problem?
thanks!
-
I think I have had the same issue with the version update when I tried to update the version using a SDHC memory card. If you will use the regular SD card that arrived with the H2 (or any other SD card that is not a high capacity one) it should work fine. I am not sure though about the long boot time.
-
ah thanks, i'll try a different card n see if that works. I'm phoning the support tomorrow, see if they can help.
mark
-
i've fixed both problems.
Update won't happen on an SDHC card, needs to be the original 512 one..
Long Boot/load has been rectified by formatting the SDHC card again from the H2.
Mark