Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: jjazzfusion on April 17, 2010, 12:39:58 PM

Title: attenuator cable question
Post by: jjazzfusion on April 17, 2010, 12:39:58 PM

I'm using Coresound Binaurals w/switchable bass roll-off, with an Edirol R-09HR.

Do I need to use an attenuator cable with this setup? ???

Thanks for your help :)

Title: Re: attenuator cable question
Post by: nickee on April 24, 2010, 05:12:45 AM

No.

Title: Re: attenuator cable question
Post by: SmokinJoe on April 26, 2010, 04:27:44 PM

Most of the time when I run CSBs > battbox > R09 I run "line in" with the gain at max and that puts the levels right where I want them... to the point where I know from experience I can "set it and forget it"  >:D  If it's really loud, turn the gain down a little.