Print Page - MOUNTS FOR 140'S/ 150'S

Title: MOUNTS FOR 140'S/ 150'S
Post by: waltmon on August 17, 2010, 03:15:54 PM

Hey now...

What clips work well and have the same fuctionality as the SG21/17MT ? I usually use a Vark bar or a vert bar.

Thanks.

Title: Re: MOUNTS FOR 140'S/ 150'S
Post by: jnorman34 on September 07, 2010, 04:35:59 PM

i think the audix clips are that size. i have also used regular AT clips, though they are 1mm smaller.

Title: Re: MOUNTS FOR 140'S/ 150'S
Post by: John Willett on September 07, 2010, 05:21:12 PM

I use Rycote INV-7 mounts for mine.

They will also work with the smaller INV-3

Title: Re: MOUNTS FOR 140'S/ 150'S
Post by: waltmon on September 07, 2010, 05:55:41 PM

Thanks...I checked out the INV-7's and actually went with the Avant SSM shocks. I am actually looking for a clips not shocks that are similar in fucntionality to the Neumann clips. When I run the Vark Bar, I use a stand mount shock under the bar and use clips only.

Title: Re: MOUNTS FOR 140'S/ 150'S
Post by: airbladder on September 11, 2010, 08:00:12 AM

What stand mount shock do you use?

Title: Re: MOUNTS FOR 140'S/ 150'S
Post by: dgale on September 11, 2010, 09:53:18 AM

Here's what I use - they only work with the actives but fit like a glove...I don't leave home without them:
http://taperssection.com/index.php?topic=118785.0;all (http://taperssection.com/index.php?topic=118785.0;all)

Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: waltmon on August 17, 2010, 03:15:54 PM