Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: blu666z on February 14, 2004, 05:31:36 PM

Title: CDWave -> FLAC
Post by: blu666z on February 14, 2004, 05:31:36 PM

Anyone found problems with doing this?  Got a 2 disc NC show that I split into 2 tracks in SoundForge.  Tracked out in CDWave.  If I use the FLAC save function in CDWave am I going to have issues with the sector boundaries at the end of disc 1?

-Kevin

Title: Re:CDWave -> FLAC
Post by: Joe w. on February 14, 2004, 11:49:02 PM

probably so. just save the wavs and run each disc through shntool.

Title: Re:CDWave -> FLAC
Post by: blu666z on February 15, 2004, 03:41:47 PM

Do sector problems at the end of the last track of a disc matter?

-Kevin

Title: Re:CDWave -> FLAC
Post by: Nick Graham on February 15, 2004, 03:44:05 PM

Not really, since there's nothing technically right after the boundary error. However, the first time somebody runs this seed through SHN Tool, and you get an email complaining about it, you'll wish you'd fixed it the first time around.

Just my $.02

Title: Re:CDWave -> FLAC
Post by: blu666z on February 15, 2004, 03:47:10 PM

Might be worth emailing the CDWave guy and see if he could add a fix in.  I'll get on that.

-Kevin

Title: Re:CDWave -> FLAC
Post by: blu666z on February 15, 2004, 03:51:16 PM

Brainfart.  You could always run shntool on the full file before doing the tracking....it would still be nice to not ever have to do it though.

-Kevin