Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Chimney Top on January 06, 2011, 07:11:55 AM

Title: Clamps/Extension pole for Neumann/SDC's
Post by: Chimney Top on January 06, 2011, 07:11:55 AM

Hey all,

i am currently using a 7ft stand with shock mounts.  But i am looking for various clamps; table, stand, pole, etc.

I have searched the forums and haven't come by anything i am looking for yet.  I am using KM184's.


Thank you

Title: Re: Clamps/Extension pole for Neumann/SDC's
Post by: taperj on January 09, 2011, 07:16:09 PM

I have one of these which I mount an AKG T-Bar on, works for most situations:

http://www.bhphotovideo.com/c/product/298908-REG/WindTech_MPC_10_Multi_Position_C_Type_Clamp.html

I also have an UltraClamp

http://www.bhphotovideo.com/c/product/350845-REG/ATS_UCAT_Clamp_Ball_Head.html

These both work well for clamping to stands but I've encountered a few balcony rails that they don't fit over. A couple suggestions to get ya started at least.

J

Title: Re: Clamps/Extension pole for Neumann/SDC's
Post by: Brian Skalinder on January 10, 2011, 02:55:31 AM

Have you tried an advanced search* for keywords clamp and extension, searching only the Mics & Setup & TSKB / Archive | Mics & Setup forums?  Doing so reveals to me 3 pages of results, many of which highlight similar discussions.

* To do so, simply click the Search button at the top of the page, specify the keywords, and in the Choose a board to search in, or search all, untick the Check All checkbox, expand the view to see all the forums, and tick only the Mics & Setup & TSKB / Archive | Mics & Setup forums.

Title: Re: Clamps/Extension pole for Neumann/SDC's
Post by: acidjack on January 10, 2011, 01:00:08 PM

Quote from: Chimney Top on January 06, 2011, 07:11:55 AM

Hey all,

i am currently using a 7ft stand with shock mounts.  But i am looking for various clamps; table, stand, pole, etc.

I have searched the forums and haven't come by anything i am looking for yet.  I am using KM184's.


Thank you

Brian's advice is good as there are many threads here on clamping.  You may also want to specify what type of situations you want the clamps for (tables, clamping to other stands, clamping to balconies, extension arms, etc.).  There are many different clamp solutions for different applications.   

Title: Re: Clamps/Extension pole for Neumann/SDC's
Post by: NOLAfishwater on January 11, 2011, 03:39:31 PM

sweet extension pole thread: http://taperssection.com/index.php?topic=110425.0

clamps thread: http://taperssection.com/index.php?topic=103678.0

clamps thread in the archive section: http://taperssection.com/index.php?board=50.0