Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: kev B on February 19, 2004, 09:20:54 PM
-
Well, I finally built my batt pack... completed sucessfully. ;D Then, I tackled the digi mod. It took me an hour to find a magnifying glass and touch up on my soldering skills. Well, after 6 tries, this task was sucessfully completed. The optical-out glows red on the stand alone trial. I did, however, manage to scorch the board a little and turn it gray/white in a spot. I can't seem to notice any side effects (and there is no smoke). Will that cause any harm? Alright, I am done gloating on a job well done *pats self on back* 8)
-
Well, I finally built my batt pack... completed sucessfully. ;D Then, I tackled the digi mod. It took me an hour to find a magnifying glass and touch up on my soldering skills. Well, after 6 tries, this task was sucessfully completed. The optical-out glows red on the stand alone trial. I did, however, manage to scorch the board a little and turn it gray/white in a spot. I can't seem to notice any side effects (and there is no smoke). Will that cause any harm? Alright, I am done gloating on a job well done *pats self on back* 8)
As long as you didn't let any smoke OUT of it, it'll be fine. ;)
-
nice job kevin---bring that bad boy to pittsburgh next friday for tuna.... :P
-
nice job kevin---bring that bad boy to pittsburgh next friday for tuna.... :P
Sorry, can't make Pittsburgh. Some time reall soon!
And, I ran a few tests and my mod works perfectly! Time to :beer1:
-
did you do jordan's battery pack from
http://www.taperssection.com/reference/html/DIY_EdirolUA5Power/ ??
Curiouse because I just ordered my digimod UA-5 from Oade and am gonna try to built the battery.
hmm, now all I need are some mics :)