with a p1. how long should I get? I get over 3 without phantom power on.
with my bp-50 I get about 6 hours if the incomming signal is digital. If you are using the P1's A/D it will be less than that.
Ed
Quote from: airbladder on February 21, 2004, 07:53:18 PM
with my bp-50 I get about 6 hours if the incomming signal is digital. If you are using the P1's A/D it will be less than that.
Ed
when i run digi in to the p-1, w/ my bp-50's i get 9 hrs easily, test it, i bet ya get the same, but w/phantom on and all that jazz, i havent a clue
I see you're running 480s so:
The best draw I could find for the dap1 = 1000mAh
draw for the 480s = 4mAh/pair
6 volts x 1 amp = 6watts
48 volts (phantom) x .004amp = .192 watts
6.192 watts / 6 volts = 1.032 amps
This is probably closer to 1.5 amps considering conversion efficiency.
The short version........you need 1.5 Amps per hour via 6 volts to run the p1/480 combo.
got a board patch......
boooooooooooooooooooooooooooooooooooo :)
an aud at the load ass bar would have sucked. plus the boards from stella come out good as hell.
Hot Tuna tonight!