8)
Run line-in in high SPL situations, but you'll likely need to run mic-in for soft stuff to get enough gain.
Quote from: Belexes on June 02, 2011, 04:49:55 PM
Run line-in in high SPL situations, but you'll likely need to run mic-in for soft stuff to get enough gain.
OK, thanks man :)
The M10's mic input can handle a pretty hot signal (guysonic measured it at +2 dBu). With those mics, you'll have no problem going mic-in...
Quote from: aaronji on June 03, 2011, 04:35:49 PM
The M10's mic input can handle a pretty hot signal (guysonic measured it at +2 dBu). With those mics, you'll have no problem going mic-in...
Thanks Aaron :)
^^^ No problem! I haven't seen a sensitivity spec for the CA-14s, but if you assume it is similar to other small cards, you'll be able to handle very high SPL (at 8 mV/Pa, for example, you'd be at 136 dBSPL before your mics were outputting 2 dBu)...