Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: Hman on July 19, 2011, 05:43:30 AM
-
Hi there,
Last night I taped the Black Crowes at Paradiso, Amsterdam.
After the first set I discovered my R09HR was turned off.. :S
When I started it up again, 'No Card' was lighting. So I guess there has been a Write-Error or something.
After that I changed battery's and recorded the 2nd set without any problems.
But.. the File is now indicating as '1 second'.
When I started recording File 2 I saw the recorder already wrote ~55min. on the SD-card.
So did the recorder actually saved the recorded part??
And if so, is there way the still save it??
-
Sounds like the wave header got corrupted. I think the R09HR has a file repair function that works on this type of problem. Can't recall which menu it is in.
-
Sounds like the wave header got corrupted. I think the R09HR has a file repair function that works on this type of problem. Can't recall which menu it is in.
Ok, thanks!
But can this problem be repaired within the R09HR?
Or should I run a copy of the file in a little program I found here on ts.com: fixwav
-
Yes, you run it on the R09HR.
-
Yes, you run it on the R09HR.
Problem solved! Thanks man..
In the Finder-menu you have to select the corrupted track and then select 'repair'..
-
Yes, you run it on the R09HR.
Problem solved! Thanks man..
In the Finder-menu you have to select the corrupted track and then select 'repair'..
Yes - that's one of the great (and I think unique) things about the R-09HR in that it has this built-in repair function that other inexpensive recorders don't.