Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: phatDats4u on October 10, 2011, 01:23:27 PM

Title: Tascam DR-1 - System Err 50
Post by: phatDats4u on October 10, 2011, 01:23:27 PM

Just bought this thing and the little box of jap junk won't even boot. Anyone ever receive this error code or know what it means? Any thoughts are appreciated

Title: Re: Tascam DR-1 - System Err 50
Post by: fmaderjr on October 18, 2011, 02:53:27 PM

Google is your friend. it turned up this:
After speaking with a TASCAM service representative I was instructed how to perform a hard reset by holding down the "track edit" and "up arrow" keys simultaneously while powering up. From there it will re-initialize the disk and ask you if you're sure you want to. Answer "yes" using the "yes/enter" key, and the unit will re-boot itself and return to the welcome screen as loaded from the factory.