Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Scooter on March 09, 2004, 12:21:51 PM

Title: So many options...AT853Rx,ADKsc-2,Etc.
Post by: Scooter on March 09, 2004, 12:21:51 PM

So i'm looking to get some mics, got about $350>400 to spend.  Been looking @ AT 3031, AT 853Rx, ADK sc-2, Rode NT3.  These would go into Samson Mixpad>D8.  The at853rx would be cool cause they could be stealthed as well as put up on a t-bar.  The 3031, sc-2, nt3 would be nice for the double duty aspect of using them for studio use as well as taping...  I haven't seen many folks using AT3031, the specs look alright, anyone use these??  I need something that can take high SPL as well, i'm tired of getting crunchy tapes at way loud shows.  Any thoughts??

Title: Re:So many options...AT853Rx,ADKsc-2,Etc.
Post by: Sean Gallemore on March 09, 2004, 02:48:36 PM

damn the crunch!  I use the Rx mics and dig 'em.

Title: Re: So many options...AT853Rx,ADKsc-2,Etc.
Post by: headroom on May 30, 2008, 09:19:36 AM

I like the  Audio Technica`s  3031 -3033 Miks very much. I never heard so quiet miks.
Changed all Caps to Polypropylen and the Lytics to Rubicon Z/ZL.

Title: Re: So many options...AT853Rx,ADKsc-2,Etc.
Post by: headroom on May 30, 2008, 09:22:42 AM

Here the internal pics of the AT Miks bevore the modding.

Title: Re: So many options...AT853Rx,ADKsc-2,Etc.
Post by: headroom on May 30, 2008, 09:26:13 AM

The soundclips are FM radionoise  and my Voice Counting.  Modded first unmodded last.

Title: Re: So many options...AT853Rx,ADKsc-2,Etc.
Post by: headroom on May 30, 2008, 09:27:04 AM

AT 3031 modded first Neumann LM 103 last...

enjoy :)


Was Recorderd with : Miks cable Gotham GAC 2 V1 low noise to Apogge Mini MP to ( XLR Cryogenic Silver Wire in Cotton Sleeve on hemp kernel) Apogee Mini ME to SPDIF Microtrack (SPDIF Silver Wire Cotton Sleeve)
Battery Sonnenschein Dryfit with 20 x Rubicon ZL in parallels for each of  the Apogees.

Title: Re: So many options...AT853Rx,ADKsc-2,Etc.
Post by: tcf on May 30, 2008, 09:41:23 AM

Definitely check out the Nevaton mce 400.  I used it for "double duty" and it is certainly the best value for new you can get in your budget.  P.M. TNJAZZGRASS and he'll hook you up!

Title: Re: So many options...AT853Rx,ADKsc-2,Etc.
Post by: headroom on May 30, 2008, 10:07:48 AM

I heard god things about the Nevatone 400 its is maybe a bit sweeter in the highs as the DPA 4060 this is  quasi an standard for many recordings.
As I have allready the DPA 4060 I would not change it  and personally think all ohter brands has more noise. But its a bit cheaper, For an excellent cheaper Omni look for Rode NT45 Capsule it works with NT /5/6/55 bodies.

Here isa good review of lavaliers exept the Nevatons:(

http://www.kenstone.net/fcp_homepage/lavs_brockett.html


Microphones
Audio-Technica AT899
Countryman B6
DPA 4061
DPA 4071
DPA 4080
PSC Millimic
Sanken COS-11x
Sanken COS-22
Sennheiser MKE-2 Gold
Sonotrim
Sony ECM-44B
Sony ECM-55B
Sony ECM-88B
Tram TR50B
Voice Technologies VT-400
Voice Technologies VT-500