Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: vwmule on February 05, 2012, 07:10:44 PM

Title: CA14 > Littlebox
Post by: vwmule on February 05, 2012, 07:10:44 PM

If you're wondering how the CA-14 sound into a Littlebox, here's a recent recording I made:

http://www.archive.org/details/ej2012-01-16

Milab VM-44 Link: http://www.archive.org/details/jel2012-01-16

VM-44 + SBD: http://www.archive.org/details/eil2012-01-16

Title: Re: CA14 > Littlebox
Post by: hermannhesse70 on February 05, 2012, 09:17:09 PM

Quote from: vwmule on February 05, 2012, 07:10:44 PM

If you're wondering how the CA-14 sound into a Littlebox, here's a recent recording I made:

http://www.archive.org/details/ej2012-01-16

Milab VM-44 Link: http://www.archive.org/details/jel2012-01-16

VM-44 + SBD: http://www.archive.org/details/eil2012-01-16

Sounds delicious.  I recently ordered my first set of CA=14 cards/omnis and am totally excited. I'll be recording straight into a Tascam dr100 mk2 and  hope some of my recordings turn out half that good!   :o

Title: Re: CA14 > Littlebox
Post by: hermannhesse70 on February 05, 2012, 09:19:06 PM

What kind of mic placement did you have going on here??

Title: Re: CA14 > Littlebox
Post by: vwmule on February 06, 2012, 12:02:38 AM

The mics were quite close to the stage, maybe 7 feet, and about 7 feet up. There's a partition that juts out in the middle of the room and it's easy to strap a stand to it and be out of the way. The speakers hang from the ceiling so you can get real nice captures.