Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: flicflac on March 01, 2012, 08:40:34 PM

Title: CA-14 Mic Clips
Post by: flicflac on March 01, 2012, 08:40:34 PM: Does anyone know if http://www.bhphotovideo.com/c/product/127169-REG/Shure_RK183T1_RK183T1_Set_of.html fit the CA-14's well?
I understand they work well with the 11's. I've heard the loop may have to be bent to fit the 14's.
I appreciate any input from the kind folks here.
Title: Re: CA-14 Mic Clips
Post by: F.O.Bean on March 01, 2012, 09:44:52 PM: Quote from: flicflac on March 01, 2012, 08:40:34 PM
Does anyone know if http://www.bhphotovideo.com/c/product/127169-REG/Shure_RK183T1_RK183T1_Set_of.html fit the CA-14's well?
I understand they work well with the 11's. I've heard the loop may have to be bent to fit the 14's.
I appreciate any input from the kind folks here.

If you have clipless CA-14s, get those custom NOLABars! Theyre like $50.00/each, but are indestructable and will last a lifetime. And no more guessing on angles/spacing/etc ;)
Title: Re: CA-14 Mic Clips
Post by: flicflac on March 01, 2012, 09:49:54 PM: Forgive my ignorance, I have heard of the NOLAbars , but I can't say I know anything about it. The 14's are going to be my LoPro mics. I need a clip of some sort. Can you tell me something about this NOLAbar and/or kindly post a picture?
Title: Re: CA-14 Mic Clips
Post by: F.O.Bean on March 01, 2012, 11:36:24 PM: Its a stereo mounting bar. If youre going to be stealt*ing with them, then just go the clip route!
Title: Re: CA-14 Mic Clips
Post by: to_taper on March 02, 2012, 08:57:15 AM: I just ordered a set of CA 14s (both OMNI and Cards). Any suggestions about use for stealthing - in hat or on glasses? I currently use CSBs modified to fit in my ears.

Thanks
Title: Re: CA-14 Mic Clips
Post by: Drgiggles1 on March 02, 2012, 05:38:31 PM: imo you get better results with a proper hat than glasses, especially with omni's. you need something dense between the mics like a head ;D
Title: Re: CA-14 Mic Clips
Post by: johnnyrockstar on March 07, 2012, 08:59:49 PM: Quote from: flicflac on March 01, 2012, 08:40:34 PM
Does anyone know if http://www.bhphotovideo.com/c/product/127169-REG/Shure_RK183T1_RK183T1_Set_of.html fit the CA-14's well?
I understand they work well with the 11's. I've heard the loop may have to be bent to fit the 14's.
I appreciate any input from the kind folks here.

Howdy there-

I use the Shure clips on my CA14s, but they fit very snug, so I did do a bit of bending for the best fit.
Title: Re: CA-14 Mic Clips
Post by: rastasean on March 08, 2012, 12:36:22 AM: Can you snap a picture of the mics with the clips?
Title: Re: CA-14 Mic Clips
Post by: Church-Audio on April 19, 2012, 03:26:02 PM: Quote from: johnnyrockstar on March 07, 2012, 08:59:49 PM
Quote from: flicflac on March 01, 2012, 08:40:34 PM
Does anyone know if http://www.bhphotovideo.com/c/product/127169-REG/Shure_RK183T1_RK183T1_Set_of.html fit the CA-14's well?
I understand they work well with the 11's. I've heard the loop may have to be bent to fit the 14's.
I appreciate any input from the kind folks here.

Howdy there-

I use the Shure clips on my CA14s, but they fit very snug, so I did do a bit of bending for the best fit.

Yes please post a link to the clips so I can see them.

Chris