Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: chrisv31 on April 27, 2012, 06:21:18 AM

Title: DPA 4011C
Post by: chrisv31 on April 27, 2012, 06:21:18 AM

Hi everybody,
do you know where can i find a recording made with the new DPA 4011C?
Thanks
Christophe

Title: Re: DPA 4011C
Post by: twalker on April 27, 2012, 06:46:32 AM

To my knowledge there aren't any circulating yet.  I plan on picking up a pair when I sell a couple of other pieces.  Aaronj made a cople of recordings at Jam with 2006c the omni version.  They can be found here.

http://taperssection.com/index.php?topic=154550.0 (http://taperssection.com/index.php?topic=154550.0)

Title: Re: DPA 4011C
Post by: page on April 27, 2012, 10:25:52 AM

Quote from: twalker on April 27, 2012, 06:46:32 AM

To my knowledge there aren't any circulating yet.  I plan on picking up a pair when I sell a couple of other pieces.  Aaronj made a cople of recordings at Jam with 2006c the omni version.  They can be found here.

http://taperssection.com/index.php?topic=154550.0 (http://taperssection.com/index.php?topic=154550.0)

Yeah, everyone who has the mmp-c bodies that I'm aware of doesn't have the 4011 caps.

That said, if you're familiar with the 4021/4022/4023 sound, these use the same capsule. The basic jist is that it's the amplifier body that changed and now the capsule is removable. Sonically they will be very very similar (at least enough to base a spending decision on).

Title: Re: DPA 4011C
Post by: chrisv31 on April 29, 2012, 03:17:13 PM

Thanks for your help!

Title: Re: DPA 4011C
Post by: scb on April 29, 2012, 03:34:33 PM

Quote from: page on April 27, 2012, 10:25:52 AM

That said, if you're familiar with the 4021/4022/4023 sound, these use the same capsule. The basic jist is that it's the amplifier body that changed and now the capsule is removable. Sonically they will be very very similar (at least enough to base a spending decision on).

very very very very very similar

Title: Re: DPA 4011C
Post by: dointhatrag on May 04, 2012, 09:07:02 PM

I have a pair on order, should be here by may 15th.  I dont do a lot of  jamband shows anymore, but I am going take them out somewhere after I get them and post on etree.

Title: Re: DPA 4011C
Post by: chrisv31 on May 05, 2012, 04:21:03 PM

Thanks for your messages !

Title: Re: DPA 4011C
Post by: dointhatrag on July 16, 2012, 10:28:15 AM

there are some shows on etree now. I also sent this video to youtube with 24bit 4011c sound, check it out

dpa 4011c - oade sup mod fre2-le (24/48) - sony vegas (added gain, and video sync) - youtube

http://youtu.be/W3mxaoLgAVw